User's Manual

11
1) Press the “P” button for 5 seconds to access the controller features. The controller
will beep twice.
2) Press and release the “P“ button once to select the clock (hour digits will ash).
3) Press the “ “ button to scroll up or the “ “ button to scroll down.
4) Press the “P” button to switch to the minute digits.
5) Press the “ “ button to scroll up or the “ “ button to scroll down.
6) Wait 12 seconds to exit programming. The controller will beep once.
SETTING THE CLOCK
When the system is congured with an optional remote start, the controller has 5
different melodies to choose from for remote start ON and 5 melodies for remote start
OFF conrmation.
1) Press the “P” button for 5 seconds to access the controller features. The controller
will beep twice.
2) Press and release the “P“ button 3 times to select the melody settings. The clock
will change to “S 1” indicating “start melody #1” for the remote start ON melody.
3) Press the “ “ button or the “ “ button to scroll through the melodies.
4) Press the “P” button to switch to the remote start OFF melody selection.
5) Press the “ “ button or the “ “ button to scroll through the melodies.
6) Wait 12 seconds to exit programming. The controller will beep once.
CHANGING (OPTIONAL) REMOTE START MELODIES
Controller Options (cont’d)
SELECTING MELODY & VIBRATE MODES
Whenever 2-way alerts are received from the system, the controller can alert you
with a melody, vibration, or both. By default, the controller is set for melody only.
Press the “P” and “ “ buttons simultaneously for 2 seconds to change the
setting. The “MUTE” (vibrate) icon on the status screen will turn on & off indicating
your selection.
The controller has 2 convenient timer functions. The PARKING TIMER tells you
how long you’ve been parked in case you are at a parking meter or other parking
areas with time restrictions. The REMOTE START TIMER tells you how long your
engine has been running in remote start mode.
PARKING TIMER: Press LOCK twice within 5 seconds. When the controller receives
both LOCK conrmations, it will start the timer.
REMOTE START TIMER (requires an optional remote start module): This turns on
every time you remote start.
Note: Pressing the “P” during either timer mode will switch between the timer
and clock.
PARKING TIMER & REMOTE START TIMER