Operation Guide

4 Button / 1 Way Remote Start Systems
QUICK START OPERATION GUIDE
4 Button / 1 Way Remote Start Systems
QUICK START OPERATION GUIDE
Register today at www.CarAlarm.com
to activate/learn about your warranty & download a complete operation guide.
SECURITY*, KEYLESS ENTRY, & CONVENIENCE FUNCTIONS
FUNCTION BUTTON(S) NOTE
Lock & Arm*
Security enabled systems will flash the status LED.
Lock Only*
,
Ideal for occupied vehicles, RV’s, etc.
Unlock & Disarm*
If only driver’s door unlocks, press again to unlock all
Silent Arm/Disarm*
x 2
System will toggle Arm/Disarm each time
Disable Sensor*
,
Sensors are disabled until you Lock/Arm again.
Trunk/Hatch Release
For 3 Sec.
By default, the system will also disarm/unlock
Panic
or 3 Sec.
Doors will Lock or Unlock before panic.
REPLACING YOUR REMOTE BATTERY
STEPS REMOTE PART# BATTERY (QTY)
1) Find the part # on the back of the remote to identify the battery.
2) Remove the screw from the back of the remote
3) Gently pry the case in halves apart to access & replace the battery.
1412 & 1417 CR2032 (1)
1415 & 1418 CR2016 (2)
*Security related functions only available on some models. Consult your installer to upgrade.
Copyright 2018 Omega Research & Development Technologies, Inc. QOM_4BUT1WAY_20190315
Additional Features
System Upgrades
Visit www.CarAlarm.com today
To Download your complete operation guide and learn more about:
- Anti-Carjacking Mode
- Secure Code Override
- Turbo Timer Support & Operation
- Customizing System Options
- Passive Security Functions
- Emergency Override
- Linkr Smartphone Control
- 2-Way Controllers w/ Extended Range
- Upgrading To Full Security With Sensors & Siren
Scan to register &
download the full
operation guide at
CarAlarm.com!
/c/omegard
/omegard
Problems? Questions? Contact Customer Service:
800-554-4053 (toll free) | [phone] (outside USA)
14
This device complies with FCC Rules part 15. Operation is subject to the following two conditions: 1) This device may not cause
harmful interference &, 2) This device must accept any interference that may be received, including interference that may cause
undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user’s authority to operate the equipment.
Your System Model:
(Installer, write system model above)
Supported Antenna Models:
REC-1N4 REC-2N4-3D
REC-2N9-3D RFK-X2-2N9