Submittal Sheet

Architectural & Engineering Specifications
August 2001
“A” UNIT ONLY
MODELS: 690RMTLA
DESCRIPTION
• BULK PACK OF “A” UNITS
• Installs in ceiling or 2" x 4" wall studs.
• Mounts on either 16" or 24" O.C. joist or stud.
• Discharge is through 3" round duct through roof or wall.
• Sturdy mounting brackets of double metal thickness
slotted on housing for vertical mounting adjustments.
• Extra large outlet box area.
• Polypropylene weather damper.
• Refer to NuTone's catalog for a complete listing of
accessories to effectively adapt this Bathroom Fan
to your construction requirements.
DESIGN FEATURES
Dimensions: Housing: 7
1
⁄ 2 " long x 7
1
⁄ 4 " wide x
3
5
⁄ 8 " high.
Material & Finish: Housing: Galvanized steel.
Duct Size: 3" diameter.
INSTALLATION
• Not for use in kitchens.
• Suitable for use over tub or shower enclosure when
installed in a GFI protected branch circuit.
• Not for use with solid-state speed controls.
• Install in ceiling or 2" x 4" wall studs. “A” unit housing
installed during rough-in stage of construction. Power
unit assembly and grille are installed when ceiling
or wall is finished.
• Use a standard on-off toggle switch (purchased
separately). Installation Instructions are included
with each unit.
Product specifications subject to change without notice.
NuTone, Inc., 4820 Red Bank Road, Cincinnati, Ohio 45227
Printed in U.S.A.
CERTIFIED TEST DATA
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by the
Home Ventilating Institute, for off-the-shelf products, as
they are available to consumers. Product performance is
rated at 0.1 in. static pressure, based on tests conducted in
AMCA's state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based on
laboratory measurements. This NuTone model is listed by
Underwriters' Laboratories Inc.