Spec Sheet

REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
Broan Hartford, Wisconsin www.broan-nutone.com 888-336-3948
FEATURES
GRILLE:
•
White polymeric – blends well with any decor
•
Torsion spring grille mounting - no tools required
BLOWER:
•
Plug-in, permanently lubricated motor
•
Polymeric blower wheel
•
Snap in/out assembly for easy cleaning - no
screws to drive or drop
HOUSING:
•
Compact, 25 gage galvanized steel, attaches easily
to wall or ceiling joists. Cannot be installed in walls
using 2" x 4" joists
•
Double strength mounting flanges with keyhole slots
•
Removable wiring cover - make connections away
from tight corners
•
No electrical knockout to remove
•
Polymeric duct fitting with tapered sleeve for easy,
positive duct connection
•
Quiet polymeric damper prevents cold backdrafts - no
metallic clatter
•
U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling
mount only).
CONTROLS (purchase separately):
• Refer to the NuTone ventilation fan catalog for a
complete line of accessories to effectively adapt this
fan to your construction requirements.
Available only as follows:
•
MODEL 6884H Project Housing Pack (18 per carton)
combined with MODEL 696RNB Project Finish
Pack (6 per carton).
MODEL 6964N
CEILING/WALL FAN
12C 1103059B
TYPICAL SPECIFICATION
Fan shall be NuTone Model 6964N.
Fan shall have galvanized steel housing with double-
strength mounting flanges. It shall be ducted vertically
(horizontally) to a roof cap (wall cap).
Blower assembly shall be removable and permanently
lubricated.
Air delivery shall be no less than 50 CFM and sound
level no greater than 4.0 sones. All air and sound ratings
shall be certified by HVI.
Non-metallic damper/duct connector shall be included.
Fan shall be U.L. Listed for use over bathtubs and
showers when connected to a GFCI protected branch
circuit.
product specifications subject to change without notice.