Spec Sheet
Architectural & Engineering Specifications
August 2006
Ceiling/Wall
Blower
MODELS: 696N
DESCRIPTION
• For baths up to 45 sq. ft., other rooms up to 60 sq. ft.
• Installs in ceiling or 2" x 4" wall studs.
• Mounts on either 16" or 24" O.C. joist or stud.
• Discharge is through 3" round duct through roof or wall.
• Sturdy mounting brackets of double metal thickness
slotted on housing for vertical mounting adjustments.
• Extra large outlet box area.
• Efficient impeller blower wheel.
•
Attractive white polymeric grille with torsion springs
to adjust for thickness variances in ceiling or wall.
• Polypropylene weather damper.
• Refer to NuTone's catalog for a complete listing of
accessories to effectively adapt this Bathroom Fan
to your construction requirements.
DESIGN FEATURES
Air Delivery: 50 CFM at 0.10" S.P.
Sound Level: 4.0 Sones.
Dimensions: Housing: 7
1
⁄
2
" long x 7
1
⁄
4
" wide x
3
5
⁄
8
" high.
Grille: 9
1
⁄
8
" long x 8
3
⁄
4
" wide x
1
⁄
2
" thick.
Material & Finish: Housing: Galvanized steel.
Grille: Engineered Resin.
Motor: Shaded pole, thermally protected,
120vAC, 60 Hz, .9 amp.
Blower Wheel: One-piece polypropylene.
Duct Size: 3" diameter.
ARCHITECT'S SPECIFICATIONS
Exhaust Fan shall be NuTone Model Number 696N
as manufactured by NuTone according to listed
specifications. Fan shall ventilate 50 CFM at 0.10" S.P.
at a sound level of 4.0 Sones. Housing shall be
7
1
⁄
2
" x 7
1
⁄
4
" x 3
5
8
" and connect to 3" duct.
INSTALLATION
• Snap on plastic duct transition.
•
Not for use in kitchens.
• Suitable for use over tub or shower enclosure when
installed in a GFI protected branch circuit.
• Not for use with solid-state speed controls.
•
Install in ceiling or 2" x 4" wall studs. “A” unit housing
installed during rough-in stage of construction. Power
unit assembly and grille are installed when ceiling
or wall is finished.
•
Torsion springs on grille adjust for thickness variances
in ceiling or wall.
• Use a standard on-off toggle switch (purchased
separately). Installation Instructions are included
with each unit.