Specification

Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Ar
c
hitect
Engineer
Contr
act
or
Submitted by Date
11K 99044761A
DESCRIPTION
LIGHT FIXTURE:
• Corrosion resistant brushed nickel finish
• Frosted glass shade
• Close mount design
• Uses two 60 Watt maximum, candelabra base bulbs. Bulbs not
included.
• Vent openings in fixture base for exhaust fan
• Light fixture assembly is plug-in and removable
BLOWER:
• Plug-in permanently lubricated motor
• Polymeric blower wheel
HOUSING:
• Rugged, 26-gage galvanized steel construction
• Fits in 2" x 6" construction
• Sturdy key-holed mounting brackets for quick, accurate
installation
• Tapered, polymeric duct fitting with built-in backdraft damper
for easy, positive duct connection and no metallic clatter
DO NOT install in a tub or shower enclosure.
NOTE: For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 1.6 70 2.0 4" Round
INSTALLATION
Complete installation instructions are included with each
Decorative Ventilation Fan with Light.
ARCHITECT'S SPECIFICATION
Decorative Ventilation Fan with Light shall be NuTone Model
745BNNT.
Unit shall have galvanized steel housing with dual integral mounting
brackets. It shall be ducted to a roof or wall cap.
Blower assembly shall be removable and have a permanently
lubricated motor.
Light fixture assembly shall be plug-in, removable and include a
frosted glass shade and a corrosion-resistant base with brushed
nickel finish.
Lamps shall be two 60 Watt maximum, candelabra base,
incandescent.
Air delivery to be no less than 70 cfm and sound level no greater
than 2.0 sones. Air and sound ratings shall be certified by HVI.
Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
Architectural & Engineering Specifications
October 2011
Decorative Ventilation
Fan with Light
MODEL 745BNNT
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.