Submittal Sheet

Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
Broan-NuTone Canada Mississauga, Ontario www.nutone.ca 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
80B 99044166A
INSTALLATION
Complete installation instructions are included with each
Decorative Ventilation Fan with Light.
ARCHITECT'S SPECIFICATION
Decorative Ventilation Fan with Light unit shall be NuTone
Model 761WHNT.
Unit shall have galvanized steel housing with dual integral
mounting brackets. It shall be ducted to a roof or wall cap.
Blower assembly shall be removable and have a permanently
lubricated motor.
Light xture assembly shall be plug-in, removable and include
a white opal glass shade and a corrosion-resistant base with
chrome nish.
Lamps shall be two 60 Watt maximum, B10 type, candelabra
bulbs.
Air delivery to be no less than 100 cfm and sound level no
greater than 3.5 sones. Air and sound ratings shall be certied
by HVI.
Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
Architectural & Engineering Specications
February 2008
Decorative
Ventilation Fan with Light
MODEL 761WHNT
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
DESCRIPTION
LIGHT FIXTURE:
• Corrosion resistant white nish
• White opal glass shade
• Close mount design
• Uses two 60 Watt maximum, B10 type, candelabra bulbs.
Bulbs not included.
• Vent openings in xture base for exhaust fan
• Light xture assembly is plug-in and removable
BLOWER:
• Plug-in permanently lubricated motor
• Polymeric blower wheel
HOUSING:
• Rugged, 26-gage galvanized steel construction
• Sturdy key-holed mounting brackets for quick, accurate
installation
• Tapered, polymeric duct tting with built-in backdraft damper
for easy, positive duct connection and no metallic clatter
NOTE: For installation in at ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 2.2 100 3.5 4" Round