Spec Sheet
SPECIFICATION SHEET
Broan Hartford, Wisconsin www.broan-nutone.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Quiet combination unit, built with high performance
blower and attractive styling.
FEATURES
GRILLE:
• Bright white grille
• Snap-in light diffusing lens for 14W (max.) A19 shape,
E26 base LED bulb (bulb not included)
VENTILATOR:
• Resilient anti-vibration mounts
• Plug-in, permanently lubricated motor
• Low sound, high performance blower wheel
HEATER:
• 1300 watts, with metal blower wheel for efficient, even
heating
• Plug-in, permanently lubricated motor - functions
independent of ventilator
HOUSING:
• Adjustable mounting brackets span up to 24"
• Polymeric damper/duct connector with 2" long tapered
sleeve and no metallic clatter
• Compact 23 gage corrosion resistant steel housing finished
with powder coat paint
NOTE: For installation in ceilings up to 12/12 pitch
• Suitable for use in insulated ceilings (Type I.C. - Thermally
protected)
• Use supply wiring rated for at least 90°C.
• Light turning off or blinking may indicate an improper lamp
wattage or type.
MODEL 765H80L
HEATER / FAN / LIGHT
12G 1101274E
TYPICAL SPECIFICATION
Combination unit shall be NuTone Model 765H80L.
Unit shall have galvanized steel housing and adjustable
mounting brackets.
Unit shall be rated to handle an A19 shape and E26 base
LED bulb, 14W (max.).
Fan, heater and light shall be separately controllable. Motors
shall be permanently lubricated.
Air delivery shall be no less than 80 CFM and sound level
no greater than 2.0 Sones. All air and sound ratings shall be
certified by HVI.
Units shall be U.L. Listed.
Suitable for use in insulated ceilings. (Type I. C. - Thermally
protected)