Spec Sheet
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 www.Broan-NuTone.com 1-800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specifi cations
April 2020
Ventilation Fan
with Fluorescent
Light
MODEL 769RFT
DESCRIPTION
• Energy-saving Fluorescent Fan-Light Combination
utilizes one (1) NEMA Type CFQ13W/G24q 13-watt
compact fl uorescent lamp (lamp must be purchased
separately).
• Electronic Ballast
• White polymeric grille with break resistant polymeric lens.
• Quiet operation with molded one piece blower wheel,
and backdraft damper.
• Plug-in motor and light.
• For baths up to 65 sq. ft., other rooms up to 85 sq. ft.
• Refer to NuTone’s catalog for a complete listing of
accessories to eff ectively adapt this Fan-Light
Combination to your construction requirements.
DESIGN FEATURES
Air Delivery: 70 CFM
Sound Level: 4.0 Sones.
Dimensions: Housing: 9” x 9” x 5¾”.
Grille: 12¹/” x 10⁷/”.
Material &Finish: Housing: Galvanized steel.
Grille: White polymeric.
Motor: Shaded pole, thermally protected.
Blower Wheel: One-piece polypropylene,
4¾” diameter.
Duct Size: 4” diameter.
Electrical Rating: 120 V, 60 Hz, 1.3 A.
Mounting: Mounting fl anges provided.
Ballast: Electronic.
02D 99044150B
INSTALLATION
• Not for use in kitchens.
• Complete installation instructions are included with
each unit.
• Suitable for use over tub or shower when installed in a
GFCI protected branch circuit.
• Type IC for use with thermal insulation
• Not for use with solid state speed controls.
ARCHITECT’S SPECIFICATIONS
Fluorescent Fan-Light Combination shall be NuTone Model
Number 769RFT as manufactured by NuTone according to
listed specifi cations. Fan shall ventilate
70 CFM at 0.10 S.P. at a sound level of 4.0 Sones.
Housing shall be 9” x 9” x 5¾” and connect to 4” duct.