Submittal Sheet

ManualsBrandsNuTone ManualsVentilation Hood8832WH

Architectural & Engineering Specifications

March 2004

Deluxe

Exhaust Fan

MODEL 8832 SERIES

DESCRIPTION

• Designed for bathrooms up to 75 sq. ft. (6.7 m

), dressing

or other rooms up to 100 sq. ft. (9.3 m

• One-piece sculptured intake grille available in white

or silver anodized aluminum, which adjusts

for various ceiling or wall thicknesses.

• Centrifugal blower wheel channels air to the outside

through 3" (7.6 cm),round duct.

• Mounting brackets facilitates installation between 16" (40.6

cm) or 24" (61 cm) o.c. joists or studs.

• Built-in precision-fit non-metallic damper. Plug-in motor

‘floats’ on sound-absorbent cushions.

• Refer to NuTone's catalog for a complete listing of

accessories to effectively adapt this Exhaust Fan

to your construction requirements.

DESIGN FEATURES

Air Delivery: 80 CFM (38 LS).

Sound Level: 2.5 Sones.

Dimensions: Housing: 8

⁄

" x 9" x 4" deep

(21.6 cm x 22.9 cm x 10.2

cm).

Material & Finish: Housing: Galvanized steel.

Grille: Model 8832SA: silver

anodized aluminum. 8

⁄8" x 10

⁄

(21.9 cm x 27.3 cm).

Model 8832WH: white

polymeric. 9

⁄8" x 10

⁄

(23.8 cm x 27.3 cm).

Motor: Plug-in, thermally protected.

Blower Wheel: Polymeric.

Duct Size: 3" diameter (7.6 cm).

Electrical Rating: 120v, 60Hz, .75A.

INSTALLATION

• Complete installation instructions are included with

each unit.

ARCHITECT'S SPECIFICATIONS

Deluxe Exhaust Fan(s) shall be NuTone Model Number

8832SA or 8832WH as manufactured by NuTone according

to listed specifications. Housing shall be 8

⁄

" x 9" x 4" (21.6 cm

x 22.9 cm x 10.2 cm) deep and unit shall ventilate at 80 CFM

at a sound level of 2.5 Sones, and shall connect to 3" (7.6 cm)

diameter duct.

8832WH Shown

Summary of content (2 pages)

PAGE 1
Architectural & Engineering Specifications March 2004 Deluxe Exhaust Fan MODEL 8832 SERIES DESCRIPTION • Designed for bathrooms up to 75 sq. ft. (6.7 m2), dressing or other rooms up to 100 sq. ft. (9.3 m2). • One-piece sculptured intake grille available in white or silver anodized aluminum, which adjusts for various ceiling or wall thicknesses. • Centrifugal blower wheel channels air to the outside through 3" (7.6 cm),round duct. • Mounting brackets facilitates installation between 16" (40.
PAGE 2
The air delivery of a ventilating system may be determined by: 1. Determine the equivalent duct length for each 90 degree elbow by adding one foot of duct length for each inch of duct diameter, i.e., a 4 inch diameter duct elbow equals 4 feet equivalent duct length and an 8 inch diameter duct elbow equals 8 feet equivalent duct length. 2. Add the total straight length of duct and the equivalent length for each elbow to obtain the total equivalent duct length. 3.