Cut Sheet

Architectural & Engineering Specifications

August 2001

Heat-a-Lite

MODEL: 9960

DESCRIPTION

Two functions in one unit. Use them individually

or together.

• 1500 watt heating element provides fan forced heat.

• Ceiling light with night light.

• Streamline design with handsome white grille. Grille is

tough polymeric, impervious to bathroom climate.

• Built in junction box with receptacles for simple plug-in

installation of heater and light.

SPECIFICATIONS

Electrical Rating: 120V, 60Hz

1667 total watts,

5118BTU.

Housing: Dimensions: 14˝ x 9

⁄

˝H.

Material: Cold rolled steel, enamel

finish.

Heating Element: Nickel-Chromium coiled resistance

wire, 1500 Watt.

Thermal Protection: Automatic resetting thermal limit

protector.

Motor: Thermally protected, shaded pole,

sleeve bearing.

Switch: Separate On/Off wall switch for heat

and light functions.

Light: 100 Watt maximum, Type A-19.

Night Light: 7 Watt maximum.

Installation instructions included with each unit.

Not designed for installation over a tub or in a shower unit.

ARCHITECTS SPECIFICATIONS

Heat-A-Lite shall be model 9960 as manufactured by

NuTone according to listed specifications.

NUTONE, INC. / 4820 RED BANK ROAD, CINCINNATI, OHIO 45227

Product specifications subject to change without notice.

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date