Spec Sheet

Broan-NuTone LLC Hartford, Wisconsin www.broan-nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specifications
January 2021
4-Way Convertible
Range Hood
MODEL ACS30
12A 99045071B
DESCRIPTION
•
Infinite speed, rotary fan control
•
Two-level light control
•
Polymeric blade and light lens (accepts up to 75 W bulb)
•
Washable aluminum filter
•
Converts to non-ducted by installing cover plate into grille and
installing the non-ducted filter (Model 41F, purchase separately)
•
Mitered sides and hemmed bottom for safety and good looks
•
Damper/duct connector included
•
7” round plate included
•
Contemporary styling in White, Black, Bisque and Stainless Steel
•
Available in 30” width
•
Optional non-duct filters (Model 41F)
•
Replacement grease filter (Model BP29)
•
120 volts, 2.5 amps
•
Max blower CFM†: 260
INSTALLATION
Complete installation instructions are included with each Fan.
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures
prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in. static pressure, based on
tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
ARCHITECT’S SPECIFICATION
Range hood shall be NuTone Model ACS30.
Unit shall be convertible between ducted (using a washable aluminum
filter) and non-ducted (using a non-ducted filter).
Motor to be permanently lubricated. RPM not to exceed 3150.
Unit shall have infinite speed fan control with separate Hi/Low/Off
light switch.
Sides shall be mitered and bottom edge hemmed - with no sharp
edges.
Air delivery shall be no less than 190 CFM (3¼ x 10 discharge)
and 220 CFM (7" round discharge) and sound levels no greater
than 7.5 Sones. All air and sound ratings shall be certified by HVI.
Unit shall be U.L. listed.
HVI PERFORMANCE
Duct Orientation Size Damper
Sones CFM
Normal High Normal
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular 3¼ in. x 10 in. Included 2.5 7.5 100 110 190
Horizontal - Rectangular 3¼ in. x 10 in. Included 3.0 7.5 100 110 190
Vertical - Round 7 in. Sold separately 2.0 7.5 100 110 220
† Max. blower CFM indicates the performance of the hood blower in open air.