Specification

Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
61C 99045618A
MODEL AERN100SN
INVENT
TM
SERIES
DECORATIVE FAN / LIGHT
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Low RPM for quiet operation
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” duct connector with tapered sleeve and no
metallic clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
LIGHT FIXTURE:
• Consumer-validated design
• Glass and steel construction
• Corrosion-resistant, satin-nickel finish
• Frosted glass shade
• Light fixture is plug-in and removable
• 18-Watt intergrated LED lighting for energy efficiency
• 3000K color temperature provides soft white light - ideal
for bathroom illumination
• LED lasts up to 25,000 hours for maintenance-free
convenience
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of
accessories to effectively adapt these fans to your
construction requirements.
For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty
TYPICAL SPECIFICATION
Fan / Light shall be NuTone Model AERN100SN.
Fan / Light shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be
ducted to a roof or wall cap using 4” round ductwork.
Blower assembly shall be removable, have a centrifugal-
type blower wheel and a permanently lubricated motor
designed for continuous operation.
Non-metallic damper/duct connector shall be included.
Light fixture assembly shall be plug-in, removable and
include a frosted glass shade. It will have a corrosion-
resistant base with satin-nickel finish.
LED shall be 18-Watt with 3000K color temperature and
800 lumen output (min.).
Air delivery shall be no less than the airflow values and
no greater than the sound level values listed in the HVI
Performance Specifications provided in this specification
(see following chart). All air and sound ratings shall be
certified by HVI.
Ceiling Ventilator shall be cULus Listed for use in insulated
ceilings (Type I.C.).