Spec Sheet

ManualsBrandsNuTone ManualsBath80 CFM Ceiling Bathroom Exhaust Fan with Light

SPECIFICATION SHEET

Broan Hartford, Wisconsin www.nutone.com 888-336-3948

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

FEATURES

GRILLE:

Matte white polymeric - blends well with any decor

Sturdy light-diffusing lens accepts up to 100W incandescent

lamp. Bulb not included.

BLOWER:

Plug-in, permanently lubricated, totally enclosed motor

Centrifugal blower wheel for quiet, efficient performance

Long life motor bearings

Designed for continuous operation

HOUSING:

Rugged, 26-gage galvanized steel construction

Integral key-holed mounting brackets for easy, secure instal-

lation directly to joist

Provision for wire suspension when installed in a drop ceiling

Tapered, polymeric duct fitting with built-in backdraft damper

for easy, positive duct connection and no metallic clatter

NOTE: For installation in ceilings up to 12/12 pitch

U.L. Listed for use in insulated ceilings (Type I.C.)

U.L. Listed for use over bathtubs and showers when con-

nected to a GFCI protected branch circuit

Use supply wiring rated for at least 90°C

Quiet heavy duty ventilators built with high per-

formance blowers.

MODEL HB80RL

FAN/LIGHT

TYPICAL SPECIFICATION

Fan/Light unit shall be NuTone Model HB80RL.

Unit shall have galvanized steel housing with integral mount-

ing brackets. Unit shall have built-in backdraft damper and

shall be ducted to a roof or wall cap.

Motor to be totally enclosed, permanently lubricated, and

have long-life bearings designed for continuous operation.

Blower assembly shall have a centrifugal blower wheel and

be removable from housing.

Air delivery shall be no less and sound level no greater than

valves listed in the "Performance Ratings" charts on this

sheet. All air and sound ratings shall be certified by HVI.

Unit shall be U.L. Listed for use over bathtubs and showers

when connected to GFCI protected branch circuit.

Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.).

91C 1100899B

Summary of content (2 pages)

PAGE 1
SPECIFICATION SHEET MODEL HB80RL FAN/LIGHT Quiet heavy duty ventilators built with high performance blowers. TYPICAL SPECIFICATION FEATURES Unit shall have galvanized steel housing with integral mounting brackets. Unit shall have built-in backdraft damper and shall be ducted to a roof or wall cap. GRILLE: Matte white polymeric - blends well with any decor Sturdy light-diffusing lens accepts up to 100W incandescent lamp. Bulb not included.
PAGE 2
PERFORMANCE RATINGS - MODEL HB80RL Model HB80RL HVI PERFORMANCE HB80RL 0.10 0.6 CFM Sones 80 2.5 HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-theshelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a stateof-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.