Spec Sheet

Broan-NuTone Canada Inc. Mississauga, Ontario www.nutone.ca 1-877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 1-888-336-3948
TYPICAL
INSTALLATION
ROOF CAP
FAN
DAMPER/SLEEVE
GRILLE
Architectural & Engineering Specifications
July 2011
In-Line Fans
MODELS ILF120, ILF130 & ILF250
ILF120d110714
DESCRIPTION
• Remotely mounted fan reduces noise in occupied areas
• Use with adjustable inlet grilles to control flow for any situation
• Remote mounting provides flexibility in system design
• High quality external rotor motor features long life, efficiency and
quiet operation
• Easy mounting to rafters or joists
• Backward inclined centrifugal fan for strong air delivery with
minimal noise
• ILF130 and ILF250 models are ENERGY STAR
®
qualified
DESIGN FEATURES
Air delivery: ILF120: 110 CFM at .2” S.P.
ILF130: 130 CFM at .2” S.P.
ILF250: 250 CFM at .2” S.P.
Sound Level: N/A - unit is remotely mounted
Housing: Durable polycarbonate plastic
Motor: External rotor, ball bearing, 115 volts AC, 60 Hz
ILF120 0.2 amps
ILF130 0.2 amps
ILF250 0.6 amps
Blower Wheel: Backward inclined centrifugal
Duct Size: 4” diameter ILF120
5” diameter ILF130
6” diameter ILF250
INSTALLATION
• Not for use in cooking areas
• Not for use in wet locations
• Suitable for use over tubs and showers when connected to a
GFCI-protected branch circuit
• Suitable for use with solid state speed controls
• Housing mounts directly to bracket. Bracket mounts to rafter or
joist
• Complete installation instructions included with each unit
• Switches and accessories available separately
ARCHITECT’S SPECIFICATIONS
Exhaust fan shall be Model ILF120, ILF130 or ILF250 as manufactured
by NuTone according to listed specifications.
PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.