Manualshelf

Spec Sheet

ManualsBrandsNuTone ManualsAppliancesUnity 30-Inch Under Cabinet Range Hood, 300 Max Blower CFM, Stainless Steel
12
SPECIFICATION SHEET
UNITY - NCS3 SERIES
Under-Cabinet
UNITY
Venmar Ventilation ULC | 550 Lemire Blvd., Drummondville, QC Canada J2C 7W9 | 1 877-896-1119 | www.broan-nutone.ca
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers.
Product performance is rated at 0.1 and 0.25 in. static pressure at high speed based on tests conducted in an HVI-approved state-of-the-art test laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
** Max. blower CFM indicates the performance of the hood blower in open air.
The clean, contemporary shape complements any kitchen design. Impressive lighting and superior smoke and odor
removal are a mere introduction to everything this hood has to offer.
SIZE BLACK WHITE STAINLESS
GREASE FILTERS
(replacement)
NON-DUCTED
FILTERS
30 in. NCS330BLC NCS330WWC NCS330SSC HPFAMM30 (Type C2) HPF30 (Type Xc)
Dimensions
shown in inches.
99045792F
FEATURES
Max. Blower CFM** 300
Control type 2-speed Rocker
Delay off no
Filter Clean Reminder no
Heat Sentry™ no
ADA Capable yes
Lighting
2-level 50 W Halogen
(bulbs not included)
Grease Filters Micro Mesh (Qty. 2)
Installation Hardware Standard
ENERGY STAR
®
no
Recirculation
Non-ducted filters sold separately
AC INPUT
120 V, 60 Hz - 1.4 AMPS
OPTIONAL ACCESSORIES
7-in. Round Damper BP87Q
7-in. Round Adapter Plate SR680508
Make-up Air Dampers MD6TU, MD8TU and MD10TU
MOUNTING HEIGHT
18 in. to 24 in. from cooktop to bottom of hood
LIMITED WARRANTY
1-year (See installation manual for full warranty text.)
FOR INDOOR USE ONLY
0
0.1
0.2
0.3
0.4
0 50 100 150 200 250 300 350 400
Stac pressure (in. w.g.)
Ai rfl ow (cfm)
Vercal High Speed,
7-in. round
Vercal High Speed,
wi th 3¼ in. x 10 in. da mper
Horizontal High Speed,
with 3¼ in. x 10 in. damper
HVI PERFORMANCE
Duct Orientation Size Damper
Sones CFM
Normal Medium* High Normal Medium*
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular
3¼ in. x 10 in.
Included 1.5 3.0 5.0 130 180 125 220
Horizontal - Rectangular
3¼ in. x 10 in.
Included 1.5 3.0 5.0 110 150 115 210
Round - Vertical 7 in. Sold Separately 1.5 3.0 5.0 140 190 100 240

Summary of content (2 pages)