Spec Sheet

SPECIFICATION SHEET BLISS - NQLA1 SERIES
Under-Cabinet
BLISS
Venmar Ventilation ULC | 550 Lemire Blvd., Drummondville Québec Canada J2C 7W9 | 1 877-896-1119 | www.nutone.ca
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 and 0.25 in. static pressure at
high speed based on tests conducted in an HVI-approved state-of-the-art test laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
99045803D
A design that can transform a kitchen, Bliss will provide an exciting departure from the typical range hood.
Sophisticated curves and infrared controls allow you to imagine new possibilities.
SIZE STAINLESS WHITE
GREASE FILTERS
(replacement)
NON-DUCTED
FILTERS
30 in. NQLA130SS NQLA130WH HPFA430 (Type "C5") HPF30 (Type "Xc")
Dimensions
shown in inches.
FEATURES
Max. Blower Airflow 450 CFM
Control type 3-Speed Infrared
Delay off yes
Filter Clean Reminder yes
Heat Sentry™ yes
ADA Capable yes
Lighting 3-level LED (included)
Grease Filters Hybrid Baffle (Qty. 2)
Installation Hardware EZ1 Bracket
ENERGY STAR
®
no
Recirculation Non-ducted filters sold separately
AC INPUT
120 V, 60 Hz - 1.4 AMPS
OPTIONAL ACCESSORIES
7-in. Round Damper BP87Q
7-in. Round Adapter Plate SR680508
ADA Wiring Kit HAWRK3
Make-up Air Dampers MD6TU, MD8TU and MD10TU
MOUNTING HEIGHT
18 in. to 30 in. from cooktop to bottom of hood
LIMITED WARRANTY
1-year
3-year (LED modules only)
(See installation manual for full warranty text.)
FOR INDOOR USE ONLY
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 50 100 150 200 250 300 350 400 450
Stac pressure (in. w.g.)
Airflow (cfm)

Vercal High Speed,
7-in. round
Vercal High Speed,
Horizontal High Speed,
with 3¼ in. x 10 in. damper
with 3¼ in. x 10 in. damper
HVI PERFORMANCE
Duct Orientation Size Damper
Sones CFM
Normal Medium* High Normal Medium*
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular 3¼ x 10 in. Included 0.7 2.5 6.0 150 230 310 360
Horizontal - Rectangular 3¼ x 10 in. Included 0.7 2.0 5.5 150 240 340 400
Round - Vertical 7 in. Sold Separately 0.4 2.0 5.5 150 220 330 380