Installation Guide

5. CONNECT WIRING

WARNING

Risk of electrical shock. Electrical wiring must be done by qualified personnel in accordance with all applicable

codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting

means to prevent power from being switched on accidentally.

1. Connect cable to range hood wiring using included wire connectors. Connect BLACK to

BLACK, WHITE to WHITE and GREEN or BARE wire to GREEN wire.

2. Reinstall wiring box cover using both screws previously removed in step 3.1.

3. Reinstall bottom panel using the 7 screws previously removed in step 3.1. Make sure

both grease guides are aligned with the holes.

5. Slide the main grease cup back in.

HE0055

HO0172

4. Using long nose pliers, pull out the end of each grease guides (B). Then set them in

such a way their flange slightly protrudes above the bottom panel surface (C).

HOLES

HO0046