Spec Sheet
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specifications
August 2015
QTXEN Series
Fan/Light/Night Lights
MODELS QTXEN080FLT,
QTXEN110FLT
ARCHITECT’S SPECIFICATION
• Fan shall be NuTone Model QTXEN080FLT (QTXEN110FLT).
• Fan shall have corrosion resistant galvanized steel housing with
four-point mounting capability. It shall be ducted to a roof or wall
cap using 6” round ductwork.
• Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor designed for
continuous operation.
• Non-metallic damper/duct connector shall be included.
• Bulbs shall be (2) 18W (max.) high efficiency, GU24 based
fluorescents and separate 4W (max.), type C7 night light bulb.
• Air delivery shall be no less than 80 (110) CFM and sound level
no greater than 0.3 (0.7) Sones. All air and sound ratings shall
be certified by HVI.
• Fan shall be ENERGY STAR® qualified and have an energy
efficient permanent split capacitor motor.
• Fan shall be U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling mount only).
• Fan shall be U.L. Listed for use in insulated ceilings (Type I.C.).
51H 99045465A
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Maintains a high percentage of rated CFM in less than ideal
installations
• Low RPM for quiet operation
HOUSING:
• Rugged, galvanized steel construction
• 6” round ducting for superior performance
• Polymeric duct connector with tapered sleeve and no metallic
clatter
• 7-5/8” height allows for 2” x 8” (nominal) joist installations
• Sturdy, easy, four-point mounting directly to joist
• Includes unique, patented spacer for mounting to engineered
“I” joists
• Includes hanger bars to position housing anywhere between
16” to 24”-on-center joists
• Two sets of mounting holes for hanger bars allow flush
installation with bottom or top of drywall
• Can be mounted in ceilings up to 12/12 pitch
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
• Energy efficient lighting - uses (2) 18W (max.) high efficiency,
GU24 based, fluorescent bulbs (included) and 4W (max.), type
C7 night light bulb (not included)
• Durable steel reflector with white enamel finish
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of accessories to
effectively adapt these fans to your construction requirements.
U.L. Listed for use over bathtubs and showers when connected to
a GFCI protected branch circuit (ceiling mount only).
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty