Spec Sheet
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specifications
August 2015
Model QTXEN150FLT
Fan/Light/Night Light
ARCHITECT’S SPECIFICATION
• Fan shall be NuTone Model QTXEN150FLT.
• Fan shall have corrosion resistant galvanized steel housing with
four-point mounting capability. It shall be ducted to a roof or wall
cap using 6” round ductwork.
• Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor designed for
continuous operation.
• 6” round damper/duct connector shall be included.
• Bulbs shall be (2) 18W (max.) high efficiency, type GU24 based
fluorescents and separate 4W (max.) type C7 night light bulb.
• Air delivery shall be no less than 150 CFM and sound level no
greater than 1.4 Sones. All air and sound ratings shall be certified
by HVI.
• Fan shall be ENERGY STAR® qualified and have an energy
efficient permanent split capacitor motor.
• Fan shall be U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling mount only).
• Fan shall be U.L. Listed for use in insulated ceilings (Type I.C.).
51H 99045456A
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Low RPM for quiet operation
•
Airflow-smoothing baffles reduce turbulence
HOUSING:
• Rugged, galvanized steel construction
• 6” round duct connector with tapered sleeve and no metallic
clatter
• 7-5/8” height allows for 2” x 8” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
• Includes unique, patented spacer for mounting to engineered
“I” joists
• Includes hanger bars to position housing anywhere between
16” to 24”-on-center joists
• Can be mounted in ceilings up to 12/12 pitch
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
• Energy efficient lighting - uses (2) 18W (max.) high efficiency,
GU24 based, fluorescent bulbs (included) and 4W (max.) type
C7 night light bulb (not included)
• Durable steel reflector with white enamel finish
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of accessories to
effectively adapt these fans to your construction requirements
U.L. Listed for use over bathtubs and showers when connected to
a GFCI protected branch circuit (ceiling mount only).
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty