User guide.
Important safeguards. Warning! To avoid the risk of serious injury, carefully read all instructions before operating your Magic Bullet Kitchen Express™. When using any electrical appliance, basic safety precautions should always be observed, including the following important information.
bowl and can cause the ingredients to leak. • To reduce risk of injury, never place chopping blade or discs on base without first attaching bowl properly in place. WARNING! • To prevent overheating and pressure build up, never allow the Magic Bullet Kitchen Express™ to run for more than one minute at a time.
cup attached. The exposed blades can present a very dangerous hazard. • Do not use this appliance if any parts appear to be damaged. If you have any questions or concerns, please contact customer service. FEED CHUTE • Do not overload or jam the feed chute with too much food. • When using the food pusher, never use excessive force to push food down the feed chute. ADDITIONAL SAFEGUARDS • Remove and safely discard any packaging material or promotional labels before using the appliance for the first time.
WARNING! Always make sure the unit is properly and completely assembled before connecting to power outlet and operating. • Ensure that the surface where the appliance operates is stable, level, clean, and dry. • Vibration may occur during normal operation. • Any significant spillage onto the surface under or around the appliance, or onto the appliance itself, should be cleaned and dried before continuing to use the appliance.
5
Contents.
What’s included. 7 motor base 3.
Assembly guide.
Using the food processor: chopping blade. 1 Place work bowl on a clean, dry, flat surface, like a counter top. 3 Add your food ingredients to the bowl. Remember to keep your hand and fingers out of the bowl and away from the chopping blade. 2 Carefully place the chopping blade onto the bowl shaft. 4 Place the bowl lid on top of the bowl and turn it clockwise to lock it into place. NEVER place hands, fingers, utensils, or any non-food items into the feed chute.
5 Place the work bowl on top of the motor base, and turn it clockwise to lock it in place. 6 Turn the power control knob to ON or PULSE to activate the motor. 8 Remove the bowl from the base by turning it counterclockwise. Place bowl on clean, dry, flat surface. NOTE: The bowl must be locked securely in place, or the motor will not run. 7 When you are finished, turn the knob to the OFF position. WARNING: ALWAYS wait until the blade has stopped moving before removing the bowl.
9 Remove the lid by turning it counter-clockwise to unlock. 11 Pour your food ingredients from the bowl. WARNING: Never unload or pour food from bowl without first removing the chopping blade. 11 10 Carefully remove the chopping blade and set it aside. Blade is sharp, handle with care.
Using the food processor: disc 1 Place the work bowl on a clean, dry, flat surface, like a countertop. NOTE: Always use the two larger holes (finger holes) to handle the blade discs. 2 Carefully place the blade disc onto the bowl shaft, with the desired side facing UP. 3 Place the bowl lid on top of the bowl and turn it clockwise to lock it into place. NEVER place hands, fingers, utensils, or any non-food items into the feed chute.
4 Place the work bowl on top of the motor base, and turn it clockwise to lock it in place. NOTE: The bowl must be locked securely in place, or the motor will not run. 13 5 If needed, cut your food so it will fit in the feed chute. Then place food into the chute.
6 Turn the power control knob to the ON position. 7 Always use the food pusher to guide food through the feed chute. NEVER place hands, fingers, utensils, or any non-food items into the feed chute.
8 When you are finished, turn the knob to the OFF position. 9 Remove the bowl from the base by turning it counterclockwise. Place bowl on clean, dry, flat surface. WARNING: ALWAYS wait until the blade has stopped moving before removing the lid. 10 15 Remove the lid by turning it counter-clockwise to unlock. 11 Using finger holes, carefully remove the disc blade and set it aside. Blade is sharp, handle with care.
NOTE: Always use the two larger holes (finger holes) to handle the blade discs. 13 Pour your food ingredients from the bowl. WARNING: Never unload or pour food from bowl without first removing the blade disc.
Using the blender: cup and cross blade. 17 1 Place the motor base on a clean, dry, flat surface, like a counter top. 3 Twist on the cross blade assembly until the cup and the blade assembly are sealed tight. 2 Add ingredients into the Magic Bullet cup (making sure you do NOT exceed the MAX line). 4 Turn the sealed cup upside down and place onto the motor base, turning it clockwise to lock the cup onto base. NOTE: The cup must be locked securely in place, or the motor will not run.
5 Turn the power control knob to ON or PULSE to activate the motor. 6 When you are finished, turn the knob to the OFF position. WARNING: Never blend hot or carbonated ingredients, which can pressurize the sealed cup. Always use cool or room temperature ingredients. Never operate for more than one minute. The friction from the rotating blade can heat and pressurize the vessel, causing possible separation and personal injury.
Power settings. OFF Power is off, unit is not running. ON Continuous blending or food processing action. The unit stays ON until you switch to OFF. WARNING: Never leave the blender on for more than one minute! PULSE Provides quick bursts of pulsing action for more control over the texture of your food or drink. You must hold the knob on PULSE to keep the unit on, otherwise the knob will automatically move to OFF.
Care & maintenance. Cleaning the Magic Bullet Kitchen Express™ is easy. All components, except for the motor base, are dishwasher-safe. STEP 1: The most important thing — ALWAYS POWER OFF THE UNIT and UNPLUG the motor base from the power outlet when it is not in use. Do not attempt to handle the appliance until all parts have stopped moving! STEP 2: To start the cleaning process, empty the bowl, making sure little to no food scraps remain. Disassemble all parts.
Magic Bullet Kitchen Express™ one-year limited warranty. LIMITED WARRANTY FOR MAGIC BULLET KITCHEN EXPRESS™ LLC’s property. When a refund is given, your product becomes Capital Brands Distribution, LLC’s property.
trade name, logo, and bar code. The Magic Bullet Kitchen Express’s One-Year Limited Warranty does not apply to any other products that may appear to be authentic, but were not distributed/sold by Capital Brands Distribution, LLC. Normal wear and tear is not covered by this limited warranty. This limited warranty applies to consumer use only, and is void when the product is used in a commercial or institutional setting.
Warranty registration. Please visit nutribullet.com/ warranty-registration or call 1 (800) 523-5993 to register your new Magic Bullet Kitchen Express™. You will be asked to enter the Serial Number* of your product, along with the purchase date and place of purchase. The registration will enable us to contact you in the unlikely event of a product safety notification.
24
MAGIC BULLET® and MAGIC BULLET KITCHEN EXPRESS™ are the registered trademarks of Capbran Holdings, LLC. | getmagicbullet.com Copyright © 2020, Capbran Holdings, LLC. Distributed by Capital Brands Distributions, LLC, Los Angeles, CA 90025. All rights reserved. Made in China. Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
