Use and Care Manual

TO USE STEAM PROGRAM:
Press Steam if you’re only steaming food. The timer will show 0:00.
Press (or press and hold) the up/down arrows to adjust steaming time
in 1-minute increments (each up/down press will add or subtract 1
minute). The maximum time you can set for steaming is 1 hour.
STEAM
The EveryGrain
™
cooker lets you
steam foods in one of two ways:
you can steam items and cook
grains simultaneously, or you
can steam items on their own. To
steam items on their own, simply
fill the Measuring Scoop with
water and add to the cooker,
select the Steam Program, and
set the timer for the length of
time your food requires to cook.
For tender green vegetables,
remove prompty and shock in ice
cold water to stop cooking.
KEEP WARM
All programs, will automatically
switch to Keep Warm once
the cooking program has
completed, for up to 3 hours.
This will keep your grains at an
ideal temperature for when
you are ready to eat. The timer
will count up in the Keep Warm
stage to let you know how long
cooked foods have been resting.
Remove tender foods from heat
immediately after the end of the
cooking program to ensure they
will not overcook.
START STOP
Use the Start/Stop button
to start a cooking cycle after
choosing a program, cancel a
cooking program, or end the
Keep Warm stage.
DELAY START
After selecting your desired
cooking program, you can
choose to delay cooking for
up to 12 hours! This will ensure
grains or rice are ready on your
schedule. Select your desired
cooking program, then press
Delay Start, set your time
(the timer defaults to 2 hours,
but can be adjusted up to 12
hours. Use the arrows to move
up and down in increments
of 15 minutes.) After setting to
your desired delay time, select
Start, and the countdown to
commence cooking will begin.
1110