User Manual

98
STUBBORN CLEANUP
If ingredients dry inside the NutriBullet Cups, make your cleanup a snap by
filling the cup about  full with warm soapy water (not hot) and screw on
the Precision Extractor Blade. Place the cup assembly on the NutriBullet
Power Base for about 20-30 seconds. This will loosen the stuck ingredients,
and with a light scrub and rinse, you’ll be all done.
CLEANING THE NUTRIBULLET POWER BASE
For the most part, the Power Base doesn’t really get dirty, but if you neglect
to twist the precision extractor blade on to the cup tightly, liquids can leak
out and get into the base and stick to the activator buttons.
HERE’S HOW TO CLEAN IT UP:
Step 1: The most important thing — UNPLUG the Power Base before cleaning!
Step 2: Use a damp rag to wipe down the inside and utside of the Power Base.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN
THE DISHWASHER.
• BLADES ARE SHARP! Never put your hands or utensils near the precision
extractor blade and never use your hands or utensils to press the activator
buttons down while the Power Base is plugged in.
HEAVY CLEANING:
• Should the inside of the base become sticky due to spillage you may follow
these additional cleaning instructions:
• UNPLUG the Power Base and make sure the unit is o BEFORE cleaning.
• Place the Power Base on a dish towel to catch any liquid or debris.
• Pour a Tablespoon of a diluted solution of distilled vinegar and warm (not
hot) water (1 part vinegar to 2 parts water) in to the Power Base where the
precision extractor blade assembly would sit during normal use.
• Immediately use a damp dish brush to dislodge any debris and wipe it out
with a damp cloth.
• The Power Base is constructed with a drain tube that will drain any
liquid debris safely through to the dish towel without damaging the
inside components.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NUTRIBULLET,
NUTRIBULLET,
HERE’S HOW TO CLEAN IT UP:
NUTRIBULLET,
HERE’S HOW TO CLEAN IT UP:
Step 1:
NUTRIBULLET,
Step 1:
The most important thing — UNPLUG the Power Base before cleaning!
NUTRIBULLET,
The most important thing — UNPLUG the Power Base before cleaning!
Step 2:
NUTRIBULLET,
Step 2:
Use a damp rag to wipe down the inside and utside of the Power Base.
NUTRIBULLET,
Use a damp rag to wipe down the inside and utside of the Power Base.
N
NUTRIBULLET,
N
EVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN
NUTRIBULLET,
EVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN
THE DISHWASHER.
NUTRIBULLET,
THE DISHWASHER.
•
NUTRIBULLET,
•
B
NUTRIBULLET,
B
LADES ARE SHARP!
NUTRIBULLET,
LADES ARE SHARP!
extractor blade and never use your hands or utensils to press the activator
NUTRIBULLET,
extractor blade and never use your hands or utensils to press the activator
buttons down while the Power Base is plugged in.
NUTRIBULLET,
buttons down while the Power Base is plugged in.
HEAVY CLEANING:
NUTRIBULLET,
HEAVY CLEANING:
LLC
and with a light scrub and rinse, you’ll be all done.
LLC
and with a light scrub and rinse, you’ll be all done.
CLEANING THE
LLC
CLEANING THE
NUTRIBULLET
LLC
NUTRIBULLET
For the most part, the Power Base doesn’t really get dirty, but if you neglect
LLC
For the most part, the Power Base doesn’t really get dirty, but if you neglect
to twist the precision extractor blade on to the cup tightly, liquids can leak
LLC
to twist the precision extractor blade on to the cup tightly, liquids can leak
out and get into the base and stick to the activator buttons.
LLC
out and get into the base and stick to the activator buttons.
HERE’S HOW TO CLEAN IT UP:
LLC
HERE’S HOW TO CLEAN IT UP:
The most important thing — UNPLUG the Power Base before cleaning!
LLC
The most important thing — UNPLUG the Power Base before cleaning!