Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
SAFETY PRECAUTIONS INTRODUCTION When using an electrical appliance, basic safety precautions should always be followed, including the following: The Nutrichef Digital Hot Water Dispenser is tailored for making hot water available 24/7. With the new emphasis on “Healthy Living-Healthy Life“, many people are adding hot tea to quench their thirst. Today, as people are exposed to more and more chemicals and heavy metals in their environment, they are developing certain sensitivities to them.
DIRECTIONS MAIN PARTS DIAGRAM Pay attention to the following before use: 1. Preparation prior to first operation. Take out Nutrichef Digital Hot Water Dispenser, Power cord, Instruction manual and warranty from the packing box. • Fill out the warranty card and mail it back to our Company for registration and one year after-sales service. Your rights and benefits will only be guaranteed if we receive your completed warranty. • Put aside packing materials and box for future storage and transport.
2. Plug in the Power Cord to start boiling Start Boiling Boiling Finished Boiling indicator is ON Boiling indicator is OFF; Temp indicator is ON 1. Connect Power Cord to Hot Water Dispenser. 2. Plug Power Cord to the power outlet. After connect to the outlet, the“BOILING“ indicator lights up and water starts to boil automatically till reaching boiling temperature of (212°F). 3. When Water is boiling, the Hot Water Dispenser will switch in to keep warm mode.
2. If Dispenser is in keep warm mode, press "RE-BOIL" button twice to set Hot Water Dispenser into STANDBY mode. Resume boiling by pressing "RE-BOIL"again. PUSH PUSH AGAIN MAINTENANCE BODY Wipe the Hot Water Dispenser body with soft dry cloth. • Wipe with dump cloth, if the stain is hard to remove. (never use soaked cloth!) • Don't use thinner to clean, it might crack the plastic casing. • Any cloth containing chemicals might cause color changing of body.
TROUBLESHOOTING OVERHEAT PROTECTION TROUBLES POSSIBLE CAUSE White mineral or shiny Mineral Crystalized in water specks floating in the water or deposited on the surface of the inner Tap water contain too much lining of the Hot water minerals causing deposits on Dispenser the surface of the inner lining Odors in the hot water Water does not pump out smoothly Does not pump water out at all Hot water leaking out from the nozzle No Power Hot Water Dispenser body case feels hot SOLUTION Clean with cit
HOT WATER DISPENSER FEATURES: NCHUB24 • 360° Rotating Base • Instantly Heat & Dispense Hot Water! • Simple Electric Plug-in Design • Built-in LED Light Illuminates When Dispensing • Adjustable Water Temperature & Dispensing Amounts • Convenient Easy Access Refillable Water Tank • Transparent Water Container with Clear Level Mark • Safe for Placement on Any Table or Countertop • Used for All Drinks Including Instant Coffee, Tea & Soups! • 2 Way Easy Dispensing Methods: Electric Auto Dispense & Cup Touching