User Manual

LID

HANDLE

GLASS

BODY

PANEL

KEY FIGURE DEFINITIONS

Power-On: Upon powering on, the display will

show "----" indicating you’re in standby mode.

Press the key again to enter shutdown mode.

Function: In standby, after selecting a function

(see below), the corresponding indicator light

ashes. 5 seconds after the light, heating will

start and the display will show the current water

temperature. If the yogurt function is selected,

then a countdown will be displayed instead.

(BOIL FLOWER TEA YOGURT SOUP

KEEP-WARM HEALTH TEA BOIL)

(No pot will display ‘E1’)

Timer key: Press this key to adjust the time

Temperature regulating key: Press this key to

adjust the temperature.

Warning Tone: Each press of a button, will

produce a sound. When the selected the function

is complete, there will be three consecutive sound

reminders;

Error Codes:

‘E1’ — Sensor Open or Pot needs to be placed

‘E2’ — Sensor Short

‘E3’ — Overheating

Pot missing: Display will show 'E1' and heating

will turn o after 30 seconds.

Memory Function: If the pot is removed and replaced within 30 seconds, the current

function will continue.

NOTE: There will be a 3 second delay in order to prevent improper contact while adjusting

placement.

Excess Temperatures over 248°F, will show 'E3' on the display. The unit will turn o the

heating for safety so as not to impact the life of the product.