Instructions / Assembly

3 10
ASSEMBLY INSTRUCTIONS
Step1: Attach left armrest(D) to back frame(A) using 1 bolt(F), 1 spring
ring(G), 1 washer(E). Do not over tighten.
Step2: Attach right armrest(C) to back frame(A) using 1 bolt(F), 1 spring
ring(G), 1 washer(E). Do not over tighten.
Step3: Attach 2 armrests (C,D) to seat frame(B) using 3 bolts(F), 3 spring
rings(G),3 washers(E). Do not over tighten.
Step4: Attach seat frame(B) to back frame(A) using 1 bolt(F), 1 spring
ring(G), 1washer(E). Do not over tighten.
Step5:Upon completion of full assembly and bolted up-all screws can be
tightened down.
Note:Please do not tighten any bolt until all bolts have been put into right
place.
If you tighten one bolt, it maybe cause other bolts out of position.