INSTRUCTION MANUAL Iron Splicing Dining Table ODT352BK
INTRODUCTION Thanks for purchasing and trusting NUUGARDEN with your home decorating plans. This product is a piece of furniture designed and made by NUUGARDEN Corp. We are committed to R&D and innovation and creating the most exquisite and diverse outdoor series. After unpacking and before every use, check whether the item shows any damage. In addition, check that you have all parts and hardware before assembly.
Part Number Images and Sizes Qty.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolts once all bolts place correctly and the product is lying flat. If you tighten one bolt, it may cause other bolts to get out of position. M K N M O L A STEP 1 Attach the 2pcs of tabletop (A) using 2 washers (M), 2 screws (K) with an Allen wrench (N), then using 2 washers (M), 2 nuts (L) with the wrench (O) to connect the tabletop. Finally, use an Allen wrench and wrench to tighten the screws in the opposite direction. Do not over-tighten.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolts once all bolts place correctly and the product is lying flat. If you tighten one bolt, it may cause other bolts to get out of position. I B C I STEP 2 Attach the 4pcs of legs (B) and 2pcs connection tubes (C) to the tabletop, using 12 screws (I). Do not over-tighten.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolts once all bolts place correctly and the product is lying flat. If you tighten one bolt, it may cause other bolts to get out of position. J E D J STEP 3 Fixed the support frame (D) to the connection tubes using 4 screws (J). Then put the 4 gaskets (E) into the support frame (D), using 8 screws (J) to attach the legs. Do not over-tighten.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolts once all bolts place correctly and the product is lying flat. If you tighten one bolt, it may cause other bolts to get out of position. F G STEP 4 Put the plastic parts (F) and (G) for the umbrella hole into the tabletop.
ASSEMBLY INSTRUCTIONS CAVEAT Note: Please only tighten any bolts once all bolts place correctly and the product is lying flat. If you tighten one bolt, it may cause other bolts to get out of position. H STEP 5 Put the umbrella cover (H) into the umbrella hole. Upon completing the entire assembly and bolting up, you can tighten down all screws.
CARE AND MAINTENANCE Follow the instructions for the product's material to ensure it stays in the best shape as long as possible. The information below is a general guideline. Don't hesitate to get in touch with us to learn more. • Only rinse it thoroughly with clean water to wash away dirt and grime. Never use abrasive cleansers on the furniture since they can attack the surface and leave behind scratch marks. • For stubborn grime and stains, use a soft sponge and mild soapy water.
CUSTOMER SERVICE Thanks for purchasing NUUGARDEN furniture. We are here to help you maximize your enjoyment and appreciation of it. Please do not hesitate to contact our customer service if you have any questions regarding assembly or accessories. Add: 6366 Corley Road, Norcross, GA 30071. Tel: (800) 257-7108 Web: https://nuumart.com E-mail: service@nuugarden.
NUUGARDEN USA Nuu Garden Corp. Add: 6366 Corley Road, Norcross GA 30071. Tel: (800) 257-7108 Web: https://nuumart.com E-mail: service@nuugarden.
