NUUGARDEN USA INSTRUCTION MANUAL Nuu Garden Corp. Add: 6366 Corley Road, Suite B, Norcross, GA 30071, USA Tel: (800) 257-7108 Web: http://www.nuugarden.com E-mail: service@nuugarden.
CUSTOMER SERVICE Thanks for purchasing this NUUGARDEN furniture. We are here to help you maximize your enjoyment and appreciation of it. Please do not hesitate to contact our customer service when you have any questions regarding assembly or accessories. Add: 6366 Corley Road, Suite B, Norcross, GA 30071, USA Tel: (800) 257-7108 Web:http://www.nuugarden.com E-mail: service@nuugarden.
CARE INTRODUCTION AND MAINTENANCE INTRODUCTION Thanks for instruction purchasingfor and yourtohome Follow the thetrusting materialNUUGARDEN of your specialwith product make Thanks for purchasing and trusting NUUGARDEN with your home sure that it stays the product best shape as long designed as possible.The informadecorating plans.inThis is afor furniture and made by tion below is only intended as a general guideline. For more informaNUUGARDEN Corp. decorating plans.
2 ASSEMBLY INSTRUCTIONS Step1:Attach left & right armrest (A,B) to seat frame(C) using 1 washer, 1 bolt(K). Do not over tighten. Step2:Attach left & right armrest (A,B) to back frame (D) using 4 washers(I), 4 bolts(K). Do not over tighten. Step3:Attach legs under high chair (E,F) to fixed ring (G) using 4 washers(I), 4 bolts(M), 4 nuts(L). Do not over tighten. Step4:Attach legs under high chair (E,F) to seat frame(C) using 4 washers(I), 4 bolts(O), 4 nuts(L). Do not over tighten.
A 4PCS Table Leg 2PCS B 1 A D 2PCS Table Top L 16PCS D (M6*30mm) Bolt M6*25 N Bolt Cap 16PCS E Bolt Cap 16PCS (M6*55mm) Nut 8PCS 8PCS M 16PCS O 24PCS J Washer 2PCS K Low Leg 32PCS I 2PCS F Up Leg G Chair Fixed Frame Seat 2PCS E 2PCS C Left Armrest Back 1PC 2PCS B Right Armrest Table Fixed Frame C 2PCS 8PCS 1PC U (M6*35mm) Washer V F Wrench 1PC 1PC Hex Key G 4PCS Screw 9 4
1 A B C IKJ D A ASSEMBLY INSTRUCTIONS B Step1:Attach 4 legs (A) to table top (C) using 1 bolt(G). Do not over tighten. C I K Step2:Attach 2 fixed ring(B) to leg tube using 4 washers(E) and 4 bolts(D). Do not over J tighten. Step3:Upon completion of full assembly and bolted up-all screws can be tightened down. Note:Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other bolts out of position.
3 2 G E F O N L I M J I L 7 6