NUUGARDEN USA INSTRUCTION MANUAL Nuu Garden Corp. Add: 6366 Corley Road, Norcross GA 30071. Tel: (800) 257-7108 Web: http://www.nuugarden.com E-mail: service@nuugarden.
INTRODUCTION CARE AND MAINTENANCE Follow the instruction for the material of your special product to make sure that it stays in the best shape for as long as possible.The information below is only intended as a general guideline. For more information, please contact us. Thanks for purchasing and trusting NUUGARDEN with your home decorating plans. This product is a furniture designed and made by NUUGARDEN Corp. • Only need to rinse it thoroughly with clean water to wash away dirt and grime.
Note:Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other bolts out of position. Part Number X4 Images and Sizes Qty. A 1 B 1 C 1 X4 D 1 F E F E E F M6 M6* Attach the legs (D) to the table-rack (B) using 4 bolts (F)and 4 washers (E). Attach the support ring (C) to the 4 legs using 4 bolts (F) and 4 washers (E).
Note:Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other bolts out of position. Part Number X3 Images and Sizes Qty. A 1 B 1 C 1 D 4 F E E F M6 M6* Attach the backrest (A) to the chair seat (B) using 3 bolts (F)and 3 washers (E).
Note:Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other bolts out of position. X2 Note:Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other bolts out of position. X2 X2 F F E F E X2 E F E X2 X2 F F E E Attach the left and right arm (C,D) to the chair body using 4 bolts (F) and 4 washers (E).
Note:Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other bolts out of position. Images Part and Number Sizes Qty. A 1 X2 F B 1 C 1 D 1 E F E 10 M6 10 M6* Attach the backrest (A) to the chair seat (B) using 2 bolts (F)and 2 washers (E).