GETTING S TA R T E D WITH YOUR
M3 Overview Front/Back Top Bottom
Setting up Your Phone Follow these step-by-step instructions to set up your M3. Power off the phone before inserting any cards! Remove SIM Tray Remove the SIM tray by inserting a pin eject key/paper clip in the small circular hole at the bottom of the tray. The tray will then eject from the phone. Configuration 1: Dual SIM Standby Orient SIM card to match layout on tray. SIM 1 (Nano) supports 4GLTE connections. SIM 2 (Nano) supports 4GLTE connections.
Warranty Information Limited Two Year Warranty Information NUU Limited (hereafter referred to as NUU), warrants this device to be free from defects in workmanship and materials, under normal use and conditions, for a period of two (2) year from the date of original purchase. Removable lithium-polymer battery is covered under warranty for a period of one (1) year from date of original purchase.
Warranty Registration Register Your Device Thank you for choosing NUU mobile. To receive helpful tips and faster tech support, register your device online at www.nuumobile.com/product-registration Customer Support Questions? Let us help. We're here to support you. Phone: Toll Free: 844-NUU-3365 507-529-1441 U.S. hours: M-F 8:00am-4:30pm CT See our website for after-hours support. Email: support@nuumobile.com Find a full user manual for your M3 at www.nuumobile.
FCC Information 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Body-Worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
