User Guide

Setting up Your Phone
Follow these step-by-step instructions to set up your M3.
Power off the phone before inserting any cards!
Warning: SIM cards are small enough to become a choking hazard,
so please keep them away from children. SIM cards are also quite
delicate. Please be careful when handling your card.
Remove the SIM tray by inserting a pin eject
key/paper clip in the small circular hole at
the bottom of the tray. The tray will then
eject from the phone.
After placing the SIMs and/or memory card in the
tray, slide it back into it’s slot. It will snap and
hold in place.
Plug in the microUSB connector to charge the
phone or transfer data.
Remove SIM Tray
Configuration 1: Dual SIM Standby
Configuration 2: microSD
™
Card/SIM
Replace SIM Tray
Charge/Sync
Orient SIM card to match layout on tray.
SIM 1 (Nano) supports 4GLTE connections.
SIM 2 (Nano) supports 4GLTE connections.
Orient microSD/SIM card to match layout on tray.
microSD card supports up to 64GB
SIM 2 (Nano) supports 4GLTE connections.