Crystal Titan Series Supported Cameras
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com
1
NVRsolo Supported Camera List
DP v3.3_release date 2014.5
1 / 1
Device
Name
Tested
Firmware
Video
Format
Video
Ch
Max
Resolution
Audio
I/O
Ch
PTZ
On-
Edge
Motion
UPnP
Multi
Stream
Support
Snapshot Remarks
- : not avaliable on camera
*1: not avaliable on software
*2: not test on software
For multi stream support:
Yes: multi stream fix to 500kbps/100kbps
Yes*: multi stream setting support
Note:
NWC-495 56500410
H.264
M-JPEG
1 704x576 - - - Yes - Yes -
Supported by
design
Note:
NWD-455 56500410
H.264
M-JPEG
1 704x576 - - - Yes - Yes -
Supported by
design
Note:
NWD-495 56500410
H.264
M-JPEG
1 704x576 - - - Yes - Yes -
Note:
VIP-X1XF-E 39500570
H.264
1 704x480 1-way 1/1
-
Yes Yes Yes -
Note:
Auto detect model unsupported.
H264 supports up to a maximum of 2CIF as this utilizes the Baseline Profile.
When H264 quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should be
'100'.
When MJPEG quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should
be '1'.
MJPEG frame rate depends on camera load. Value in settings dialog is not representative of actual frame rate.
Auto detect model unsupported.
H264 supports up to a maximum of 2CIF as this utilizes the Baseline Profile.
When H264 quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should be
'100'.
When MJPEG quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should
be '1'.
MJPEG frame rate depends on camera load. Value in settings dialog is not representative of actual frame rate.
Cannot auto detect model.
H264 supports up to a maximum of 2CIF as this utilizes the Baseline Profile.
When H264 quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should be
'100'.
When MJPEG quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should
be '1'.
Firmware Issue: MJPEG framerate on settings dialog is incorrect. The value is always 25.
MJPEG unstable issue. Frame rate of MJPEG stream is dependent on the camera load and can vary.
Auto detect model unsupported.
H264 supports up to a maximum of 2CIF as this utilizes the Baseline Profile.
When H264 quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should be
'100'.
When MJPEG quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should
be '1'.
MJPEG frame rate depends on camera load. Value in settings dialog is not representative of actual frame rate.
When H264 quality is set to '0', the camera will auto-adjust the quality setting. For minimum quality, the value should be
'1'.
Audio Codec support g711, not support L1, AAC.