Crystal Titan Series Supported Cameras
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com
1
NVRsolo Supported Camera List
DP v3.3_release date 2014.5
1 / 1
Device Name
Tested
Firmware
Video
Format
Video
Ch
Max
Resolution
Audio
I/O
Ch
PTZ
On-Edge
Motion
UPnP
Multi
Stream
Support
Remarks
GXV-3501
0.0.4.25
H264
M-JPEG
1 704x480 1-way 1/1 Yes Yes - Yes
GXV-3504
0.0.4.25
H264
M-JPEG
4 704x480 1-way 4/4 Yes Yes - Yes
GXV-3601
0.0.4.25
H264
M-JPEG
1 704x480 1-way 1/1 Yes Yes - Yes
GXV-3601HD
0.0.4.25
H264
M-JPEG
1 1600x1200 1-way 1/1 Yes Yes - Yes
GXV-3601LL
0.0.4.25
H264
M-JPEG
1 720x576 1-way 1/1 Yes Yes - Yes
Note:
GXV-3611HD
0.0.4.25
H264
M-JPEG
1 1600x1200 1-way 1/1 Yes Yes - Yes
GXV-3611LL
1.0.4.31
H264
M-JPEG
1 720x576 1-way 1/1 Yes Yes - Yes
Note:
GXV-3615
0.0.4.25
H264
M-JPEG
1 720x576 1-way - Yes Yes - Yes
Note:
GXV-3651FHD
0.0.1.51
H264
M-JPEG
1 2560x1920 1-way 1/1 Yes Yes - Yes
Note:
Note:
Note:
GXV-3662HD
0.0.1.50
H264
M-JPEG
1 1280x960 1-way 1/1 - Yes - Yes
Note:
Note:
Video cannot be connected under the following settings: H.264 codec, 320x240, fps=1 and bit rate >= 1024.
This might be camera FW issue.
Grandstream
- : not avaliable on camera
*1: not avaliable on software
*2: not test on software
For multi stream support:
Yes: multi stream fix to 500kbps/100kbps
Yes*: multi stream setting support
Video cannot be connected under the following settings: H.264 codec, 320x240, fps=1 and bit rate >= 1024.
This might be camera FW issue.
Video cannot be connected under the following settings: H.264 codec, 320x240, fps=1 and bit rate >= 1024.
This might be camera FW issue.
Not support 5 megapixel with M-JPEG codec currently.
Video cannot be connected under the following settings: H.264 codec, 2560x1920, fps < 5. This might be camera
FW issue.
Video disconnects easily under the following settings: H.264 codec, megapixel, fps >= 2, highest bit rate with
dim light. This might be camera FW issue.
All cameras: audio noise on G.726 codec.
All cameras: audio is not playing smoothly as users watch live videos on both NVR side and camera side, which
might be camera FW bug or performance consideration.