Crystal Titan Series Supported Cameras
Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com
1
NVRsolo Supported Camera List
DP v3.3_release date 2014.5
1 / 1
Device
Name
Tested
Firmware
Video
Format
Video
Ch
Max
Resolution
Audio
I/O
Ch
PTZ
On-Edge
Motion
UPnP
Multi Stream
Support
Remarks
VN-H37
refer VN-
H137
H.264 1 1920x1080 - - - Yes - Yes
VN-H237
refer VN-
H137
H.264 1 1920x1080 - - - Yes - Yes
VN-H137 4.02.378 H.264 1 1920x1080 - - - - Yes
Note:
VN-H157
refer VN-
H57
H.264 1 1920x1080 1-way 2/2 - Yes - Yes
VN-H257
refer VN-
H57
H.265 1 1920x1080 1-way 2/2 - Yes - Yes
VN-H57 4.00.575 H.266 1 1920x1080 1-way 2/2 - Yes - Yes
Note:
VN-H657
2.01.827
SPL2841
H264
MJPEG
1 1920x1080 - 2/2 Yes Yes - Yes
Note:
VN-T16 j.2.2.2232
H264
MPEG4
MJPEG
1 1920x1080 1-way - - Yes - Yes
Note:
VN-T216
refer VN-
T16
H264
MPEG4
MJPEG
1 1920x1080 1-way - - Yes - Yes
Note:
JVC
- : not avaliable on camera
*1: not avaliable on software
*2: not test on software
For multi stream support:
Yes: multi stream fix to 500kbps/100kbps
Yes*: multi stream setting support
1. H264 support Baseline Profile only
2. When 30fps or 25fps is set, 3DDNR, motion detection and analog viedeo output are not available.
3. Encoder settings can not be changed during multicast.
4. Firmware Issue: MJPEG video stream is unstable over high resolutions.
1. H264 support Baseline Profile only
2. When 30fps or 25fps is set, 3DDNR, motion detection and analog viedeo output are not available.
3. Encoder settings can not be changed during multicast.
4. Firmware Issue: H264 video stream is unstable over low framerate.
Motion Detection is available at Home Position.
Firmware Issue: Mjpeg video stream is unstable over high resolutions such as 1920X1080, 1280x720.
1. There are lower frame rate limitations for H264 and MPEG4. When choosing CBR, some conditions will be disabled
based on different resolution setting. When choosing VBR, some conditions will be disabled based on different
resolution setting.
2. Firmware Issue: Mjpeg video stream is unstable over high resolutions such as 1920X1080, 1280x720.
3. Firmware Issue: The Encoder parameters may not sync camera web.
1. There are lower frame rate limitations for H264 and MPEG4. When choosing CBR, some conditions will be disabled
based on different resolution setting. When choosing VBR, some conditions will be disabled based on different
resolution setting.
2. Firmware Issue: Mjpeg video stream is unstable over high resolutions such as 1920X1080, 1280x720.
3. Firmware Issue: The Encoder parameters may not sync camera web.