Crystal Titan Series Supported Cameras

Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com
1
NVRsolo Supported Camera List
DP v3.3_release date 2014.5
1 / 1
Device
Name
Tested
Firmware
Video
Format
Video
Ch
Max
Resolution
Audio
I/O
Ch
PTZ
On-Edge
Motion
UPnP
Multi Stream
Support
Remarks
VK2-
1080VRD
2.2.64
H.264
M-JPEG
1 1920x1080 1-way 2/0 - Yes Yes Yes
VK2-
1080VRDIR
3V9F
1.7.0-
T4_release
H.264
MPEG4
1 1920x1080 1-way 1/0 Yes Yes Yes Yes
VK2-
2MPVRD
2.2.64
H.264
M-JPEG
1 1600x1200 1-way 2/0 - Yes Yes Yes
Note:
Note:
VK2-
540VRD
2.1.8-release
H.264
MPEG4
1 704x576 1-way 1/0 - Yes Yes Yes
VK2-
600PTZ
2.1.8-release
H.264
MPEG4
1 704x576 1-way 1/0 Yes Yes Yes Yes
Note:
VK2-
VGAVFD
1.7.4-
T2_release
H.264
MPEG4
1 640x480 - 1/0 - Yes Yes Yes
Note:
Note:
All cameras: the port value we get is always 80 via UPnP search, which implies the cameras would be disconnected if
users change HTTP port to another number on camera web.
Vista
- : not avaliable on camera
*1: not avaliable on software
*2: not test on software
For multi stream support:
Yes: multi stream fix to 500kbps/100kbps
Yes*: multi stream setting support
VK2-1080VRD/VK2-2MPVRD: on-edge motion of video with M-JPEG codec works only as stream 1 is enabled on camera
web.
VK2-1080VRD/VK2-2MPVRD: camera may be disconnected if users configure format as H.264 on one NVR and configure
format M-JPEG on another.
The operation of setting preset point is special because setting password is a must. We suggest users finish preset point
settings on camera web.
All cameras: modifying parameter frequently may lead to camera shutdown due to slow CGI response.