Crystal Titan Series Supported Cameras

Copyright © 2014 NUUO Inc. All rights reserved.
www.nuuo.com
1
NVRsolo Supported Camera List
DP v3.3_release date 2014.5
1 / 1
Device
Name
Tested
Firmware
Video
Format
Video
Ch
Max
Resolution
Audio
I/O
Ch
PTZ
On-Edge
Motion
UPnP
Multi Stream
Support
Remarks
- : not avaliable on camera
*1: not avaliable on software
*2: not test on software
For multi stream support:
Yes: multi stream fix to 500kbps/100kbps
Yes*: multi stream setting support
CORUM
CS-385-IO
/ CS-385-IP
/ CS-390-
IP
H.264
M-JPEG
1 1600x1200 1-way 1/1 - Yes - Yes
Supported by
design
CS-390-IO VB1.0.28_YC
H.264
MPEG4
M-JPEG
1 1920x1080 1-way 1/1 - Yes - Yes
Note:
CS-410-IO VB1.0.28_YC
H.264
MPEG4
M-JPEG
1 1280x800 1-way 1/1 - Yes Yes Yes
Note:
CS-410-IP /
CS-410-IW
/ CS-415-IP
/ CS-415-
IW
H.264
M-JPEG
1 1280x1024 1-way 1/1 - Yes - Yes
Supported by
design
CS-425-IO VB1.0.28_YC
H.264
MPEG4
M-JPEG
1 1920x1080 1-way 1/1 - Yes Yes Yes
Note:
Not support 2nd stream in maximum frame rate of 1080P.
When input under N.C status, needs trigger input more than 10 sec if you want to cancel event of input.
Under particular operation, The quality or resolution of video parameter can't be set. Needs set quality on camera web
again.
The particular operations sequence is as follows:
In Advanced Mode -> use VBR -> Apply -> use CBR -> Apply -> change to Basic Mode -> Apply
When input under N.C status, needs trigger input more than 10 sec if you want to cancel event of input.
Under particular operation, The quality or resolution of video parameter can't be set. Needs set quality on camera web
again.
The particular operations sequence is as follows:
In Advanced Mode -> use VBR -> Apply -> use CBR -> Apply -> change to Basic Mode -> Apply
Not support UPnP.
When input under N.C status, needs trigger input more than 10 sec if you want to cancel event of input.
Under particular operation, The quality or resolution of video parameter can't be set. Needs set quality on camera web
again.
The particular operations sequence is as follows: