The Intelligent Surveillance Solution NVRmini 2 User Manual Ver. 1.6.0.120920.
Table of Contents 1. Installation ...................................................................8 1.1 Installation Process .....................................................8 1.2 LED Status Definitions ............................................... 16 2. Settings ..................................................................... 17 2.1 Camera Setup ........................................................... 17 2.1.1 Add Cameras by Camera Search........................ 17 2.1.
2.5.4 Network Service Setup ..................................... 51 2.5.5 CMS Service Setup .......................................... 53 2.6 Management............................................................. 53 2.6.1 View the List of Users ...................................... 53 2.6.2 Create New Users ............................................ 54 2.6.3 Modify User Information ................................... 55 2.6.4 Change a User’s Password ................................ 55 2.6.
3.3.3 Delete Tag Filter .............................................. 80 3.3.4 Import/Export Tag Filter ................................... 81 3.4 POS Display Font ....................................................... 81 3.4.1 Live View ........................................................ 81 3.4.2 Remote Live Viewer ......................................... 82 3.4.3 Playback......................................................... 83 3.4.4 Playback System ...........................................
.1.3 General Setting ............................................. 100 5.1.4 Stream Profile Setting .................................... 101 5.1.5 OSD (On-screen display) Setting ..................... 102 5.1.6 Monitor Display Setting .................................. 102 5.1.7 Notification ................................................... 103 5.1.8 Set up Joystick Control ................................... 104 5.2 Remote Live Viewer Application ................................. 106 5.2.
7.1.7 Save an Image .............................................. 129 7.1.8 Print an Image .............................................. 130 7.1.9 Backup the Recorded Video ............................ 131 7.2 Remote Playback System Application ......................... 133 7.2.1 Playback System Application Control Panel ....... 133 7.2.2 Set up Unit Connections ................................. 133 7.2.3 Search the Recorded Video ............................. 134 7.2.4 Play the Recorded Video .........
13.6 Install ActiveX ..................................................... 154 13.7 Cannot Log in to the Unit with Internet Explorer ...... 155 Appendix – RAID System....................................................... 156 Introduction to RAID ....................................................... 156 RAID 0 – Stripe .............................................................. 156 RAID 1 – Mirror ..............................................................
GNU General Public License This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please see the GNU General Public License (GPL) for the exact terms and conditions of this license at www.gnu.org. The GPL source code incorporated into the product is available for free download at our web site http://www.nuuo.com/. Subject to GPL, you may re-use, re-distribute and modify the GPL source code.
1. Installation 1.1 Installation Process Step 1: Unpack the Unit This package contains the following items: The unit Quick Start Guide Screws for disk drives Key Power cord Warranty card 19V DC power transformer CD with Install Wizard, Backup, Live View, Playback, Verification Tool and Offline Tool application, user manual, and quick start guide The electronic components within the unit can be damaged by Electrostatic Discharge (ESD).
4 bay unit front/rear view LED Reset System Status ; eSATA Status eSATA Conn. Ethernet 1 & 2 Activity 1& 2 DISK 1 & 2 Status DISK 3 & 4 Status USB Conn. Power Status RJ45 Network Conn. 1 & 2 Lock Cooling Fan HDD Tray Power Connection Step 2: Install Hard Drives Refer to compatibility list and install HDDs. For optimal performance consideration, install disks with the same model and storage capacity. The available RAID level depends on the amount of disks installed. 1.
2. Connect the power adapter to the back of the unit enclosure. See the rear view figure. 3. On the front of the unit, press the power button. See the front view figure. It takes about a minute for the unit to fully power up. Once it is powered up: The System Status LED turns blue. See the front view figure. The buzzer beeps one time. Step 5: Install the Software 1. Insert the CD into your CDROM. 2. Double-click Setup.exe to begin installation. 3. Follow the instruction of Setup.
and RAID level. Advanced Mode: configure all settings manually: network, license, camera, Date/Time, upgrade notification, and RAID level “Add license” function is supported in v1.0.0.20 and later version. 4. The Installation Wizard program starts searching for all the units on the internet currently. Choose one of them, and then click the 5. Type in the password, and then click the OK button. The default Administrator password is “admin”. 6.
Obtain network settings automatically from external DHCP server: apply all settings which are automatically generated by the DHCP server, such as IP, subnet mask, gateway, and DNS. Configure network settings manually: configure the preferred settings one by one. 7. Activate camera license to have more channel capacity, and click the button. 8. Add cameras for this server.
selecting the searched cameras and manually configuring the cameras. Click the button after completing camera list.
9. Set up the time zone, date, and time, and adjust daylight saving changes if needed. Once daylight saving function is enabled, the time change will activate automatically every year based on the recurrence you set. Click the button. 10.Check “Enable Upgrade Notification” box if you want to receive notification when there is a newer FW version. Click the 14 button.
11.Follow the following instruction and select the RAID type you want to create. Click the button. For 2 bay unit, only RAID 0 and 1 are available. 12. Review your settings. If the settings are correct, click the Finish button to exit the settings procedure and activate the system.
Once the “FINISH” button is clicked, the unit will start working. In order to ensure the stability of the unit, never pull any disks out when the system is running. 1.
2. Settings After setting up the unit, log in to the system by entering its IP address in the browser (Internet Explorer 8 and later). When connecting, choose your language, enter the username and password, and then begin using this system. There are five main functions of this unit: settings, live view, playback, help, and logout. They will be shown on the top of the page. Current firmware version and free storage capacity are shown above the function list. 2.1 Camera Setup 2.1.
4. Click the Search button. 5. The system will list all the currently available cameras. The inserted cameras are shown in blue. Click the icon to add a camera into your camera list. 6. After clicking the icon, the camera setting page will pop up. Click the item to which you want to add a camera. 7. Insert the camera name, username, and password. To have better compatibility between camera and system, please make sure the privilege of camera credential is admin-level. 8. Click the Add button to add it.
9. After clicking the Add button, the updated camera list will be displayed in the Camera Setting tab. 2.1.2 Add Cameras Manually 1. Open Internet Explorer and log in to the unit. 2. Click IP Camera / Camera Settings. 3. Click the Camera Settings tab, and the camera list will be displayed on the bottom of the page. 4. Click on the camera list for the channel you want to add and enter the camera’s information. Camera name: The name of the camera. Address: The IP address.
lens/channels. Protocol: Data transmission protocol. Vendor: Camera vendor name. Model: Camera model name. To have better compatibility between camera and system, please make sure the privilege of camera credential is admin-level. 5. Click the Save button. Save: Save the information of this camera. Reset: Return to the latest saved settings of the selected camera. Clear: Set all the settings to default value.
Camera Name: The name of the camera. Video Format: Choose the type of format which this camera supports. Frame rate: Select the frame rate of the camera. Resolution: Select the resolution of the camera. Quality: Select the image quality of the camera. Audio: Check the Enable Audio option to view and enable audio recording. 2.1.5 Set up Lens Settings 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Click IP Camera / Camera Parameters. Click the Lens Settings tab.
Vivotek (FE8171V). You are not allowed to select type so far, type depends on camera model. Lens: Enable or disable lens function. Camera Position: Select the position of the camera. If users enable the lens while lens is not installed correctly or not even installed, a warning message will pop up as a notification if users are trying to operate lens on liveview page. 2.1.6 Set up 2nd Stream Stream profile is designed for mobile client and lower fps live stream display.
2.1.7 View Camera Status 1. Open Internet Explorer and log in to the unit. 2. Click IP Camera / Camera Status. Connection Status: The status of the connection. Click the Connect or Disconnect button to change the connection status. Status Icon Connection Status Connected Connection Status Disconnected Connection Status Connecting Connection Button Connected: Normal Connected: Over Connection Button Disconnected: Normal Disconnected: Over Rec.
Recording Status Recording Status Always Recording – Recording Always Recording – Stopped Recording Status Schedule Recording – Recording Recording Status Schedule Recording – Stopped Frame Rate: The frame rate of this camera. Bit Rate: The transmission bit rate of this camera. Estimated Remaining Recording Time: Estimated remaining recording time is dividing the current free capacity by dynamic total bit rate.
Always Record: Permanently turn on the chosen cameras. Automatic Recycle: Check the Enable option to recycle disk space automatically when the disk space is full. Keep Video: Set a period during which the recorded video clips will be kept intact. (max: 365) The privilege of automatically recycle is higher than keep video if you select both. 2.2.2 Recording Schedule / Event Setup Instead of Always Record, you can begin the recording by setting the Recording Schedule. 1.
Insert: Insert new schedules. Delete: Delete the selected schedule. Configure: Modify the schedule and recording mode settings. Copy: Copy current Day Schedule to other channel(s); copy current Week Schedule to other day(s) of a week or to other channel(s). 7. The default setting of the camera’s recording schedule is from 00:00 to 24:00. If you want to modify the time slot, click the Configure button to modify the default settings first. 8. Choose the recording mode.
Always Record: Always record. Record on Event: Record when events triggered. The event can be triggered by Motion or Digital input. When setting the event Motion, please first ensure that the motion detection function of the camera has been enabled. 9. If you want to add another new schedule, click the Insert button to add a new one. 10. Click the Save button.
your unit and that camera first. Once you have finished, re-connecting them will update the settings in your unit. When setting an event, Motion or Digital input can be triggered from other cameras. This means that if the system detects motion or digital input from other cameras or I/O Box, the camera will begin recording. There is another way to set the schedule.
2.2.3 Camera Events and Responding Actions Setup 1. Open Internet Explorer and log in to the unit. 2. Click Recording & Event / Event & Action Management. 3. Choose the camera, and then select one of the events. The event list depends on camera its own ability. Connect lost: When a connection between the camera and this unit is lost, the system will trigger an action. Motion from Camera: When video motion is detected, the camera triggers an action. Input: Any external input can trigger an action.
Always Active: The selected event is always active. Active only in the following period: The selected event is only active in the designated time, which able to cover two days e.g. from 18:00 to 09:00. I/O Type: Check one of the options of I/O type. N/O means normal open, while N/C means normal close. 5. Click the Add button to set up the responding actions of this event. Output: When an event occurs, the system will send an output signal to other connected devices.
happened. Refer to Push Notification. E-map popup: When an event occurs, the system will pop up E-map with an event indicator to show users the location of the scene clearly. 6. Click the action, and then click the Configure button to modify the details of that action if necessary. 7. Click the Save button. After selecting camera events, the event information will display on the screen when it’s triggered. 2.2.4 I/O Box Input and Responding Action Setup 1. 2. 3. 4. 5. 6.
CMS will highlight this event. Push Notification: When an event occurs, the system will send instant message to the registered mobile clients as a notification. Mobile users can check the recording videos on mobile client to watch what just happened. Refer to Push Notification. E-map popup: When an event occurs, the system will pop up E-map with an event indicator to show users the location of the scene clearly.
recording or when disk is abnormal for accessing, the system will trigger an action. Daily system report: Enable users to know the system information, HDD usage, and Disk status everyday through Email without accessing to the unit to check. Unable to access FTP: The action will be triggered when the connection between the unit and FTP server is lost.
Frequency – Rearm interval: The minimum interval of notifications as the event occurs. (default: 10, max: 300) For example, you set up push notification as the responding action for motion detection. When motion detected, it may trigger several alarms. In this case, you may not want to receive several push notifications frequently, then you can define the suitable rearm interval. User List: All user accounts in this unit. 5. Click the Save button. 6.
7. When event occurs, the user will get the push notification instantly. The user can click the “View” icon to watch the recording videos. If the user password is changed, please sign in with the new password to start the service again. If users don’t want to receive notifications anymore, users can turn off this feature on NUUO mobile client.
User account won’t be exported as saving configuration, which implies the user list of push notification won’t be saved as well. 2.2.7 SMTP Server Setup 1. Open Internet Explorer and log in to the unit. 2. Click Recording & Event / Email. 3. Click the SMTP Server tab. Server Address: SMTP (Simple Mail Transport Protocol) server IP address. Port: SMTP port. Sender: Sender information. Subject: The subject of the mail. Body: Email content.
2.2.8 Add Event Contacts 1. Open Internet Explorer and log in to the unit. 2. Click Recording & Event / Email. 3. Click the Contacts tab. 4. 5. 6. 7. Add Contact: Add this new contact into the contact list. Reset: Return to the latest saved settings of the contact list. Save: Save this time modification of the contact list. Insert the name of a new contact. Insert the Email address of this new contact. Click the Add Contactor button.
4. Choose the RAID level you prefer for your disk array. 5. Check boxes of disks and click the >> button to assign disk drives for this volume. 6. Click the Create button. 7. A confirmation dialog pops up. Check the Yes, I want to create volume with those disk(s) box, and click the Yes, create it button. 8. Creating RAID volume takes a while, depending on the size of disks and the RAID level you choose. You can start recording during RAID creation.
The RAID Volume will be functional on another unit if all disks of this volume are moved to the unit. After setting RAID level, you are not allowed to change neither the RAID level nor the number of disks containing in this volume. To reduce the possibility of having problems to access public folder via My Network Places, before creating new disk volume or modifying volume, please delete the invalid volume if any.
problems on RAID volume, but the recording status is normal. Offline means that no volume is found, so recording is stopped and you cannot access your data either. File system error means that RAID volume is existed but unmounted, so recording is stopped and you cannot access your data either. Capacity: Total, free, used data capacity of the RAID volume. Update Time: The time of volume created/updated. Devices: Total number of disks and the number of active, failed, spare disks.
its nature. In case of any unexpected damage, we recommend users to unplug running HDD by this method, which can be viewed as security hard drive remove. 1. Open Internet Explorer and log in to the unit. 2. Click RAID & File System / RAID Management. 3. Click the Modify tab. 4. Click on the volume you want to modify. The information of this volume will be displayed under the Modify Volume section.
5. After removing the damaged disk. Add a free disk to replace the damaged, and click the Modify button. 6. A confirmation dialog pops up. Check the Yes, I want to modify this volume box, and click the Yes, modify it button. 7. Modifying RAID volume takes a while, depending on the size of disks you choose. Recording won’t be stopped during the modification, and the data of this RAID volume is fully accessible.
2.3.5 Delete a RAID Volume 1. Open Internet Explorer and log in to the unit. 2. Click RAID & File System / RAID Management. 3. Click the Delete tab. 4. Click the option button beside the RAID Volume you want to delete. 5. Click the Delete button. 6. A confirmation dialog pops up. Check the Yes, I want to delete this volume box, and click the Yes, delete it button. 7.
When you delete a RAID Volume, all the folders in the RAID volume and all the data saved in the folders will be deleted. Backup any important data before deleting a RAID Volume. 2.3.6 Format Neither pressing reset button nor loading default setting, the data of RAID volume won’t be deleted, which implies that format is the only way to clean the RAID information from disks. 1. Open Internet Explorer and log in to the unit. 2. Click RAID & File System / RAID Management. 3. Click the Format tab. 4.
1. Open Internet Explorer and log in to the unit. 2. 3. 4. 5. Click RAID & File System / Protocol Control. Click the Windows tab. Check and enter the unit’s information. Click the OK button. Services: Enable to let users access this unit through Windows Explorer. Server Name: The name of this unit, which is set in the Setup tab of the Network Setup function. Server Description: The name which will be displayed in Windows Explorer. Domain or Workgroup Name: The name of this unit’s workgroup. 2.3.
2.4 Auto Backup This feature enables you to automatically backup the recorded video of the previous date to FTP site. There are two steps to enable the function, one is Set up Backup Schedule, another is Set up Backup Server. 2.4.1 Set up Backup Schedule 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Click RAID & File System / Auto Backup Management. Click the Backup Schedule tab. Set up backup schedule, select the backup channels, and check the Enable option to enable Auto Backup.
the next file. If the connection is lost, the system would wait for the connection, so no file would be skipped. 2.4.2 Set up Backup Server 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Click RAID & File System / Auto Backup Management. Click the Backup Server tab. Set up the FTP server and create a folder for backup files. The folder format is “FolderName”, “FolderName/SubFolderName”, and so on. For example: AutoBackup/NVR 5.
Make sure the FTP account with privileges of administrator who is able to upload, rewrite, delete files, and create new folder. Besides, make sure the FTP server has enough space for auto backup. To avoid the failure of auto backup, please check the normality of FTP server regularly (e.g., enough space for video, system conditions.) 2.5 Network Setup 2.5.1 View Network Status 1. Open Internet Explorer and log in to the unit. 2. Click Network Setup / Network Setup. 3.
Server Name: Name your unit. Because of the internal data modifications required, it takes a few seconds to change the name of your unit. Log in again after configuration activated. Internet Protocol: Choose to obtain an IP address from external DHCP server automatically, or configure the IP address manually. IP Address: IP address of this unit. Subnet Mask: Subnet mask address. Default Gateway IP Address: Gateway IP address. Primary DNS: Primary DNS (Domain Name System) address.
2.5.3 Auto Port-Forwarding This function is designed for saving time in port configuration on router if users want to access the unit (in LAN) from WAN. Once enabling UPnP Service on router, users can do port-forwarding for setting page (default: 80), liveview (default: 5150), playback (default: 5160), and CMS (default: 5170) automatically. 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Click Network Setup / Network Setup. Click the UPnP Port Forwarding tab.
6. After selecting one of searched routers, click the icon to set up port-forwarding to this router automatically. You will find ports of setting, liveview, playback and CMS are listed. For security reason, the privilege of UPnP port-forwarding is LOWER than port-forwarding configured on router. Therefore, if the ports have been used on router, we are unable to know before finding out access failure. UPnP port-forwarding is for temporarily use only.
2. Click Network Setup / Network Service. 3. Click the Web Service tab 4. Set up a port for this unit and click the Save button. 5. Click the Live View & Playback Service tab. Live Streaming Server Port: Live streaming transmission port. Maximum Connections: Maximum connections from remote access. (Max: 64) Playback Server Port: Playback transmission port. Maximum Users: The number of users who can access playback functions at the same time.
Allowed List: Only IP addresses from the allowed list are allowed to log in. Blocked List: IP addresses from the blocked list will be unable to log in. When setting Maximum Connections in Live Streaming Server settings, 1 connection means that one user connects to one camera. If the maximum connections value is set to 16, and each user connects to 4 cameras, the allowed connections per user will become 4, rather than 16. 2.5.5 CMS Service Setup 1. Open Internet Explorer and log in to the unit. 2.
2.6.2 Create New Users 1. Open Internet Explorer and login the unit. 2. Click Management/ User Management. 3. Click the Create New Users tab. 4. Insert the username of this new user. 5. Insert the password of this new user. 6. Choose the group of this user. Power user: Power user can do all the settings except the Network Settings, RAID Settings, and Management function. User: User just can change his/her password and do the live view and playback functions.
2.6.3 Modify User Information 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Click Management / User Management. Click the Modify Users tab. Click one of the users in the User List on the bottom of this page. 5. Change the group of this user. 6. Select the live view cameras which this user can access. 7. Select the playback channels which this user can access. 8. Check whether this user can backup or delete recorded data. 9. Click the Modify User button to finish it. 2.6.
4. Choose the user. 5. Enter a new password. 6. Enter this new password again. 7. Click the OK button. 2.6.5 Delete Users Except for the administrator, you can delete any users with the following steps. 1. Open Internet Explorer and log in to the unit. 2. Click Management / User Management. 3. Click the Modify Users tab. 4. Click the Delete icon of the user you want to delete. 5. In the confirmation box, click the OK button. 2.6.
3. Select Online as the Activation Type, input serial number, and click the Activate button. 4. The license will be updated in License List if activated successfully. System will reboot automatically. 2.6.7 Offline License Activation If the device is set up in Intranet (Local LAN) without Internet connection, there is another way to activate license. 1. Open Internet Explorer and log in to the unit. 2. Click Management / License Management.
3. Click the Export button under the section of Offline Activation to export the information of this unit. 4. Download dialog pops up. Save the request file and take it to other PC which is connected to the Internet. Furthermore, the PC should be installed OffLineTool.exe which can be found from NVRmini 2 toolkit. 5. Execute the OffLineTool.exe in that PC with Internet connection, and select the request file offline.req.
6. Input the serial number, click the Activate button, and save the .dll file offline_license.dll. 7. Import the license file to the unit. 8. The license will be updated in License List if activated successfully. System will reboot automatically. 2.6.8 View the Event Log 1. Open Internet Explorer and log in to the unit. 2. Click Management / Log System to find the event list of your unit.
There are four kinds of event which will be listed on this page. Hardware Log: The log information of the operations to your unit, such as reboot or shut down. NVR Log: The log information of the NVR system, such as system, recording, user access information, POS and auto backup. NVR Event Log: The log information of the “Event & Action Management”, such as motion detection or camera connection lost. Backup and Export Log: The log information of the track of video data exported and backup.
4. Check the box of E-Map Settings or POS Settings if you want to keep the configuration. 5. Click the OK button. 6. The configuration file will be generated into the chosen folder. User account won’t be exported as saving configuration, which implies the user list of push notification won’t be saved as well. 2.6.
address; for the latter, check the box of E-Map Settings or POS Settings if you want to restore the configuration. 4. Click the Load button. 5. A confirmation dialog pops up. Click the OK button to begin to load the settings into your unit. If there is POS database existed in the unit, loading configuration with different POS application config is likely to make the original POS data unsearchable.
Operating System: Embedded Linux NVR Version: NVR system version Device Pack Version: Camera package version CPU: CPU model number CPU Loading: The approx. CPU loading of this unit MAC Address: MAC address of this unit CPU Temperature System Fan Speed Locate: Click to trigger the buzzer to let you know where the unit is 2.7.2 Smart Fan Control 1. Open Internet Explorer and log in to the unit. 2. Click System / System Settings. 3. Click the Fan Control tab. 4.
4. Check the Enable or Disable option. 5. Click the OK button. 2.7.4 UPS Setup This feature enables you to tell your unit how long to run on APC Uninterruptable Power Supply (UPS) battery power and when to shut down, after power failure. 1. 2. 3. 4. 5. Attach the APC UPS to one of the unit’s USB ports. Open Internet Explorer and log in to the unit. Click System / Settings. Click the APU UPS tab.
2.7.5 Upgrade the System 1. Open Internet Explorer and log in to the unit. 2. Click System / Upgrade. 3. Click the Firmware Upgrade tab. 4. Browse the FW for upgrading and click the OK button. 5. A confirmation dialog pops up. Click the OK button to start upgrade process. 6. After upgrade, the system will restart. You need to re-access the unit again after this. 2.7.6 Upgrade Notification Enable this function to allow us to notify you automatically when there are firmware updates (Recommended).
4. Check the option if you agree to be bound by the agreement. 5. Click the OK button. 2.7.7 System Date and Time Setup 1. Open Internet Explorer and log in to the unit. 2. Click System / Date/Time.
3. Choose the time zone. 4. Configure the year, month, day and time manually, or enable NTP server to synchronize time automatically. When NTP server enabled, the date/time settings will be grayed out. 5. Check the Adjust clock for daylight saving changes option and select the time change of daylight saving time in your location. Choose the start time and end time of recurrence. 6. Click the OK button to restart system to activate the changes.
3. Check the Reboot option. 4. Click the OK button. 5. A confirmation dialog pops up. Click the OK button to reboot the unit. The restart procedure runs automatically. When the unit is fully online: The System Status LED turns blue. The buzzer beeps one time (if the buzzer is enabled). During system restart, none of your files will be accessible from your desktops/laptops. 2.7.9 Shut down the Unit The only time you need to shut down the unit is to replace the disk drive cooling fan or the power supply.
If the system is crashed and stocked, you can press the power button and hold it for 10 seconds to force to cut off the power directly. We don’t recommend to do it if the system work properly.
3. POS 3.1 Introduction 3.1.1 System Introduction NUUO POS, a Point of Sales Systems based on NUUO NVR/DVR/NVDR/NVRmini/NVRmini 2, provides financial transaction’s surveillance solution in one central system. The architecture is as below; POS transaction data flows to NVRmini/NVRmini 2 by Ethernet. Each Cash Register with an external receipt printer is connected by DB9 cable. The transaction information delivered in R232 format can be converted to Ethernet through SCB-C31A POS data capture converter.
Operating Humidity 0-90 % Non-Condensing Baud Rate 110 bps to 230.4 kbps Data Bits 5, 6, 7 or 8 Stop Bits 1, 1.5 or 2 Parity None, Even, Odd, Mark, Space Flow Control None, RTX/CTS, XON/XOFF, DTR/DSR 3.1.2 Hardware Installation – SCB-C31A To connect Cash Register, Printer, and SCB-C31A POS data capture converter together, please follow below steps: Step 1: Please refer the user manual to setup Cash Register and printer.
The LED Indicators: LINK LED: Ethernet cable connection and data active. RUN LED: System is ready (Blinking). Serial 1: Transiting/Receiving Indicator. 3.1.3 Software Installation – SCB-C31A Step 1: Use IE-browser to setup SCB-C31A, the default IP address is 192.168.1.1 Step 2: Setup IP address and password in Server page, and click the Save button. Each time you switch the page of the web, please click Save at first. If you leave this page without saving, all changes will be ignored.
Step 3: Setup Password if needed. Password is only using to activate a security feature on the serial server. Once a password is entered it will be required to access the menu and make change of configuration when access. Please write down the Serial number and MAC address, these two parameters are necessary when user forget your password. Step 4: Setup according to your POS or Cash Register. Usually all devices are default setting, you can reserve your time to pass this step.
NVRmini 2 3.2 Software Setup 3.2.1 Activate POS License If you are not the SCB-C31 user, you need to activate POS license before starting the following settings, please refer to License Activation for details. 3.2.2 NVR POS Setting 1. Open Internet Explorer and log in to the unit. 2. Click POS & I/O / POS Settings. 3. Click the Settings tab to set POS application.
Data Source: List of all the data sources. Insert: Click to insert POS and do the POS settings. See Insert POS Setting for details. Delete: Click to remove the selected POS from the list. See Delete POS Device for details. Configure: Click to configure the selected POS and modify the POS settings. See Configure POS Setting for details. POS info: The setting information of the selected POS on this window. Name: Name of the POS data source. IP: IP of the POS data source.
SCB-C31: The device possesses one POS license, and should be equipped with the cash register not working as TCP server. SCB-C31A: The difference from SCB-C31 is not possessing one POS license, so user should activate POS license. TCP Client: Cash register possesses with network, so no need to have SCB-C31A as a converter. POS license is needed. 3. After setting, click Test Connection to test POS device connection. 4.
5. Select Tag Filter. See Tag Filter for details. 6. Select the camera of Associated Cameras to display POS transaction data overlay on live video. 7. Set up display area for each camera video in Display Region Definition. Default: The default display area is in the upper left corner of video image. User Define: Enable User Define, and define display area by dragging rectangle 8. Click the OK button to save. 3.2.4 Delete POS Device 1. Choose POS device. 2.
original and filtered data. Filter Tools: Upper/down buttons to arrange the priority of each filter; remove button to remove the filter from list. 3. Enter name of this tag filter. 4. Click Connect button to capture POS transaction data from POS device. The original transaction data will be shown on the left window. If you don’t want the data keep importing when editing filter, click Disconnect button to stop connecting. 5.
Omit: Neglect the selected text which is meaningless or not important. The text will disappear on the right window. Substitute: Use another word(s) to replace the selected text. The system will pop up a substitution panel for replacing word(s) users want. The replaced text will be shown on the right window. Add New Line: Define the selected text as the symbol for changing to new line. The result will be shown on the right window.
End: Define the selected text as the symbol for transaction ending. The filtered data will be separated line as below. 7. Filter Tools Up: Move a tag filter up; the upper filter will be operated earlier. Down: Move a tag filter down; the lower filter will be operated later. Delete: Remove a filter from this tag filter list. 8. Click the OK button to save. 3.3.2 Edit Tag Filter 1. Select Tag Filter name from drop-down menu. 2. Click Edit button. 3. Configure the Tag Filter window. 4.
2. Click Delete button to delete it. 3.3.4 Import/Export Tag Filter 1. Click Import/Export button and select Import/Export URL. 2. Click Open/Save to Import/Export Tag Filter. 3. After importing tag filters, users can simply select tag filter from drop-down menu without editing new tag filter. 3.4 POS Display Font The system allows users to set up the fonts of POS transaction data on live view video and playback video. 3.4.1 Live View 1. Open Internet Explorer and log in to the unit. 2.
5. Click the OK button to save. 3.4.2 Remote Live Viewer 1. Startup > NUUO NVRmini 2 > Remote Live Viewer 2. Click the General Setting button to open Live View Setting window. 3. Select the font, font size, font color and background for the POS transaction data overlaid the video.
4. Click the OK button to save. 3.4.3 Playback 1. Open Internet Explorer and log in to the unit. 2. Click the Playback button. 3. Click the Setting button to open Setting window. 4. Select the font, font size, font color and background for the POS transaction data overlaid the video. Also, select the type of transaction data display time.
3.4.4 Playback System 1. Startup > NUUO NVRmini 2 > Playback System 2. Click the Setting button to open Setting window. 3. Select the font, font size, font color and background for the POS transaction data overlaid the video. Also, select the type of transaction data display time.
3.5 POS Transaction Data Search POS Search tool is used to search key word of all transaction data. 3.5.1 Search POS Transaction Data through Playback 1. Open Internet Explorer and log in to the unit. 2. Click the Playback button. 3. Click the Open Record button to open Data Time Search Dialog window.
4. Click the POS Search button to open POS Search Dialog window. 5. 6. 7. 8. 9. Select a POS device(s) from the POS list. Set up Start Time and End Time in Data Time Period section. Enter the keyword you want to search. Click the Search button, the results will be shown in Transaction table. Select an item from Transaction table, the transaction detail will be shown in the table of lower right corner, and the recorded video of associated camera will be shown in the upper right corner. 10.
3.6.1 Select Period by POS Search 1. Refer to POS Transaction Data Search. 2. Select the transaction data from the result list, and click OK. 3. The period you select from POS search results will be selected automatically. 4. Click OK to playback videos. 3.6.2 Select Period by Data & Time through Playback 1. Open Internet Explorer and log in to the unit. 2. Click the Playback button. 3. Click the Open Record button to open Data Time Search Dialog window. 4.
window. 3. Click the Remote Server Site icon on the top of the window to select the server users want to access. 4. Highlight the video clip you want to review by left-clicking and dragging the time period. You may also utilize the Start Time and End Time in Date Time Period section after choosing cameras. 5. Click OK to playback videos. 3.7 Backup Video with POS Data There are three ways to backup video with POS transaction data. 3.7.1 Backup through Internet Explorer 1.
6. Select the cameras you want to backup. 7. Select the directory you want to save the backup data. 8. Click the Backup button. 9. The system will then begin backup process automatically. 3.7.2 Backup through Playback System 1. 2. 3. 4. 5. Startup > NUUO NVRmini 2 > Playback System. Click the Open Record button to select data. Click the Backup button. Check the Backup POS Transaction option. Set the Start Time and End Time you want to backup. 6. Select the cameras you want to backup. 7.
4. I/O 4.1 Introduction 4.1.1 System Introduction NUUO provides remote I/O solution for NVRmini/NVRmini 2 by connecting SCB-C31 with NUUO I/O Box SCB-C24/26/28. Refer to the below architecture, I/O device is connected directly with I/O Box, and input/output signal delivered in RS485 format are converted to Ethernet through SCB-C31. NVRmini/NVRmini 2 can use the signals to do more sophisticated setup, such as starting recording when input triggered, triggering output as an event happened, and much more. 4.
RS485 RJ-45 RS485 Reset Switch Power Multiple I/O Boxes can be connected to a single SCB-C31. However, series connection of I/O boxes is forbidden. Furthermore, the default ID for each I/O Box is the same. Please follow the direction to setup I/O Box one by one. 4.1.3 Software Installation – SCB-C31 Step 1: Open Internet Explorer to setup SCB-C31. The default IP address is 192.168.1.1. Step 2: Setup IP address and port. 1.
2. Server Listening Port: The default port is 4000, which is not the port for setting page, but for signal transmission. Step 3: Click the Apply button to activate configuration. Due to the stability of data transmission, one SCB-C31 can be paired with one NVR unit only. 4.1.4 Software Installation – SCB-C24/26/28 The default ID of I/O Box is identical.
IOConfig.exe starts scanning the ID from 0 to 255, and it may take around a minute to finish scan. 2. When the I/O Box is discovered, click on the item and change the ID from the New Address field. Click the Update device button to activate the settings. 3. Scan again to make sure the configuration is validated. In this case, we changed the ID to 10, so we can modify the number of “Starting address” to 10 to save the searching time.
4. Refer to the HW Installation section to connect other I/O Box and repeat the steps 1 through 3 above to configure more I/O Boxes. 4.2 Software Setup 4.2.1 Add I/O Box 1. Open Internet Explorer and log in to the unit. 2. Click POS & I/O / I/O Settings / I/O Box Settings. 3. Enter the information of I/O box. Device No: The unique ID system distributes in sequence automatically. Device Name: The name of the I/O box. Device Type: The types of I/O box, including SCB-C24, SCB-C26, and SCB-C28.
Port: The transmission port of SCB-C31. ID: The ID of the I/O box. 4. Click the Create button, and the information will be updated in I/O Box List. 5. Repeat steps 3 and 4 to add more I/O boxes in the list. 6. Click the Save button to activate the settings. Meanwhile, system will distribute an unique ID to each device. 4.2.2 Modify I/O Box Information 1. Open Internet Explorer and log in to the unit. 2. 3. 4. 5. Click POS & I/O / I/O Settings / I/O Box Settings.
4. For output pin, you can configure its duration time to control how long output acts after it’s triggered. The duration range is 3 sec~60 sec. N/A stands for unlimited. 5. Click the Save button. If the box of I/O pin is unchecked, this pin won’t be shown on relative application pages. In other words, you cannot do any setting/operation with this pin. See details in next section. 4.3 Relative Configuration and Application 4.3.1 Record on Input Trigger Refer to Recording Schedule / Event Setup. 4.3.
5. Live view There are two ways to execute the live view function: with Internet Explorer or with the Remote Live Viewer application. 5.1 Internet Explorer 5.1.
server name, video current status, and bit rate for a selected channel. Start Menu > E-Map: Upload map and drag camera or I/O on it to track device location and alarm status with instant response when an event occurred. See details in the chapter of E-Map. Start Menu > I/O Control Panel: Utilize I/O device function remotely. User can remotely adjust the Output Pins by turning it on or off. Click to turn on/off the “Output” pins Playback: View playback video remotely.
Enable Move: Adjust the current view of camera which supports PT function by dragging the button on the display screen. Enable Digital PTZ: Click the + or – button to zoom in or zoom out the view. The lower right square flashing on the video grid indicates the correspondent view of the camera. ImmerVision Lens Setting: Select the mode of lens, original, PTZ mode, Quad mode and Perimeter mode.
5.1.2 Live View Setting 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Set the cameras. Click the Live View button on the top of the page. Select a camera(s) from the camera list on the right and then drag it to where you wish the image to be displayed. When running Internet Explorer, do not use the function “Open in New Window”. Using this function may cause Internet Explorer to become unstable. 5.1.3 General Setting 1. 2. 3. 4. Open Internet Explorer and log in to the unit.
5. Check the Enable audio on active channel option to enable audio streaming on active channel. This function synchronizes with right click on camera to enable audio. 6. Check Synchronize video frames to avoid the tearing problem occurring in video display while increasing the CPU loading. 7. Click the OK button. 5.1.4 Stream Profile Setting Select the preferred stream type of each camera as default live view profile. 1. 2. 3. 4. Open Internet Explorer and log in to the unit.
5. Adjust the stream profile of every camera with stream profile enabled in the setting page. 6. Click a camera and select its stream profile, and click the Copy to… button to apply this profile to other channels. 7. Click the OK button. 5.1.5 OSD (On-screen display) Setting 1. Open Internet Explorer and log in to the unit. 2. Click the Live View button on the top of the page. 3. Click the General Setting button. 4. Click the OSD tab. 5. Check the Enable camera OSD option. 6.
Auto Scan Layout 5. Select Primary channel which will always be on the screen when activating auto scan; while select Secondary channel which has second priority when activating auto scan. Enter the time interval for auto scan. 6. Select the screen division of NxN type. 7. Click the OK button. 5.1.7 Notification 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Click the Live View button on the top of the page. Click the General Setting button. Click the Notification tab.
5. Check Show recording status to show the crystal ball with recording 6. 7. 8. 9. status on monitor display. Check Show camera event to display the words of detected camera event on the correspondent screen. Check the Enable playing sound on event option. Select sound file, default sound or user defined sound (.wav), and define the cycle. Check Popup system event to pop up system event message dialog as a warning when a system event occurred. Click the OK button.
Parameter: Choose the preset point from the drop-down menu. Default: Click to back to default setting. Import: Click to import the settings. Export: Click to export the settings. 5. Click the OK button.
5.2 Remote Live Viewer Application 5.2.1 Remote Live Viewer Application Control Panel Log In/ Log Out (Server / Group) Server and Camera List Set Preset Point / Go to Preset Point Zoom out / Zoom in PTZ Camera Control Exit Focus Far / Auto Focus / Focus Near Minimize Play / Stop / Drop Start Monitor Playback Information Display Window Live View Setting PTZ Camera Control: You may control the camera view by using the PTZ camera control panel to adjust the camera’s view.
Start Monitor > E-Map: Upload map and drag camera or I/O on it to track device location and alarm status with instant response when an event occurred. See details in the chapter of E-Map. Start Monitor > I/O Control Panel: Utilize I/O device function remotely. User can remotely adjust the Output Pins by turning it on or off. Click to turn on/off the “Output” pins Playback: View playback video remotely. Auto Scan: Activate auto scan to rotate the channels on the display screen.
Enable Move: Adjust the current view of camera which supports PT function by dragging the button on the display screen. Enable Digital PTZ: Click the + or – button to zoom in or zoom out the view. The lower right square flashing on the video grid indicates the correspondent view of the camera. ImmerVision Lens Setting: Select the mode of lens, original, PTZ mode, Quad mode and Perimeter mode.
5.2.2 Unit Connection Setting 1. Startup > NUUO NVRmini 2 > Remote Live Viewer. 2. Click the General Setting button. 3. Click the Server tab. 4. Insert the unit name. 5. 6. 7. 8. Insert the IP address. Modify the port if necessary. Insert the user name. Insert the password.
9. Check the Save Password / Auto login option. 10. Click the Test Server button to test the connection between the local application and the remote unit. 11. Click the Add button to add this unit into your remote server list. 12. Click the OK button. 5.2.3 General Setting 1. Startup > NUUO NVRmini 2 > Remote Live Viewer. 2. Click the General Setting button. 3. Click the General tab.
4. Check the Enable audio on active channel option to enable audio streaming on active channel. This function synchronizes with right click on camera to enable audio. 5. Check Synchronize video frames to avoid the tearing problem occurring in video display while increasing the CPU loading. 6. Select monitor(s) to run LiveView. 7. Click the OK button. 5.2.4 Camera Group Setting You can put different cameras into the same group. 1. Startup > NUUO NVRmini 2 > Remote Live Viewer. 2.
4. Log in to all the servers that contain the camera(s) you would like to put into the group(s). 5. Click the Insert button to create a new group. 6. Name this group. 7. Highlight the camera(s) that you would like to add into this group and then click the <-- button. 8. Repeat step 6 to establish the group. 9. Repeat steps 3 through 7 to establish other groups. 10. Click the OK button. 5.2.5 Delete/ Rename Camera Groups 1. 2. 3. 4. 5. 6. 7. Startup > NUUO NVRmini 2 > Remote Live Viewer.
4. Adjust the stream profile of every camera with stream profile enabled in the setting page. 5. Click a camera and select its stream profile, and click the Copy to… button to apply this profile to other channels. 6. Click the OK button. 5.2.7 OSD (On-screen display) Setting 1. Startup > NUUO NVRmini 2 > Remote Live Viewer. 2. Click the General Setting button. 3. Click the OSD tab. 4. 5. 6. 7. 8. 9. Check the Enable camera OSD option. Set the foreground and background settings of the OSD.
Auto Scan Layout 4. Select appointed server group to activate auto scan. 5. Select Primary channel which will always be on the screen when activating auto scan; while select Secondary channel which has second priority when activating auto scan. Enter the time interval for auto scan. 6. Select the screen division of NxN type. 7. Click the OK button. 5.2.9 Notification 1. Startup > NUUO NVRmini 2 > Remote Live Viewer. 2. Click the General Setting button. 3. Click the Notification tab.
4. Check Show recording status to show the crystal ball with recording 5. 6. 7. 8. status on monitor display. Check Show camera event to display the words of detected camera event on the correspondent screen. Check the Enable playing sound on event option. Select sound file, default sound or user defined sound (.wav), and define the cycle. Check Popup system event to pop up system event message dialog as a warning when a system event occurred. Click the OK button.
Parameter: Choose the preset point from the drop-down menu. Default: Click to back to default setting. Import: Click to import the settings. Export: Click to export the settings. 4. Click the OK button. 5.2.11 Set up Remote Live Viewer 1. Startup > NUUO NVRmini 2 > Remote Live Viewer. 2. Click the unit you wish to access in your remote server list. 3. Click the LOG IN button to access your unit. 4.
6. E-Map There are two ways to execute the live view function: by Internet Explorer or by Remote Live Viewer application. With E-map, user can easily track the device location and alarm status with instant response when an event occurs. The arrows and lightening icon on E-map represent cameras and I/O devices. These icons will turn red as being triggered by alarms. There are two modes in E-map application, Edit Mode and Browse Mode.
E-map. Digital Input: Select it to highlight the device with green ring on map and show status on Information Window. If the Digital Input is from IP camera, the preview window will display live video of the camera. Digital Output: Select it to highlight the device with green ring on map and show status on Information Window. If the Digital Output is from IP camera, the preview window will display live video of the camera. Map Indicator: Clicking the indicator will lead to the next map layer.
5. Repeat steps 2 through 4 to add more maps. 6. Click the Upload button to activate all the settings. The maximum file size of each map is 500KB. There are 10 layers of map, and the map capacity of each layer is 10. 6.1.3 Edit Map 1. Make sure being in “Edit Mode” and all devices are inserted and connected. 2. Right click on the Map icon in Device and Map Tree List to obtain the option menu to edit map, or just click the Edit Map button to configure. 3. Repeat step 2 to edit more maps. 4.
Adjust the Layout 6.1.7 Layout Adjustment Adjust the Layout: Click the triangular indicator to hide the Device and Map Tree List / Preview and Information Window on right and left side of the window. Click the indicator again to back to the default. Maximize the Map: Click the icon on the upper right to get the full screen display of E-map. 6.1.8 Relative Configuration and Application When an event occurs, related E-map pops up to indicate the location of this event.
6.2 Remote Live Viewer Application 1. Startup > NUUO NVRmini 2 > Remote Live Viewer. 2. Click the Start Monitor button and select Open E-Map. 6.2.1 E-Map Control Panel Server List Edit Mode / Browse Mode Switch Button Device and Map Tree List E-Map Picture Preview Window and Information Server List: Select a server to display the E-map of the server.
7. Playback There are two ways to execute the playback function: with Internet Explorer or with the Playback System application. 7.1 Internet Explorer 7.1.
Open Record: Click the Open Record button to access the Date-Time Panel and select the video records which you want to review. General Setting Record Display Calendar View: view the Record Display Window as a calendar. List Control: view the Record Display Window as a list control. Play Play when open: check this option to set the system to start playing the video clip every time a record is withdrawn.
mode, Full-view panorama mode, Dual-view panorama mode. Type of modes depends on lens location. 7.1.2 Search the Recorded Video Refresh POS Search Video Preview Previous/ Next Recording Date Record Display Window Date Time Period Time Table Recording Types : refresh the Record Display Window. or : go to previous or next recording date. Record Display Window: Display the available recorded video records.
Show Event Log: Show the time of event detection in the time table. Color of event type can be defined by preference. 1. From the Record Display Window at the top left of the Date Time Panel, select the date you want to search the record from. The red lines shown on the time table indicate available recorded video records. 2. Use color bars to differentiate recording types from each other. This will help you select video clips. 3.
7.1.3 Play the Recorded Video Be sure that you have set the schedule / recording event first. Open Internet Explorer and log in to the unit. Click the Playback button on the top of the page. Click the Open Record button. The Record Display Window will show the information of the available video clips. Select the date you want to search the record from. 6. Highlight the video records that you want to review. 7. Click the OK button. 1. 2. 3. 4. 5. 7.1.
1. 2. Define detection zone by dragging to draw a detection zone. Modify the sensitivity setting. 3. 4. Set the Interval. Check the Stop when found option. If unchecked, the search tool will list all the events it found, instead of stopping at the moment the event found. Click the Search button. 5. Missing Object: Alarm is set on when the selected object is removed from the defined area on the screen. 1. Define detection object by dragging to draw a detection zone. 2. Modify the sensitivity setting.
it cleaner. Sharpen: Check the option to activate the function. Move the slider control to the right to sharpen the image, to the left to soften it. Brightness: Check the option to activate the function. Move the slider control to the right to make the image brighter. Contrast: Check the option to activate the function. Move the slider control to the right to increase contrast. Grey Scale: Check the option to show the record in gray-scale mode so the image displays in black and white. 9.
9. 10. 11. 12. 13. 14. Choose the folder where you want to save the file. Insert the file name and click the Save button. Choose the export format. Choose the use profile. Check to export the recorded video with Audio, OSD and POS Transaction. Click the OK button. We recommend that you export to the .asf format when saving video. In exporting to the .avi format, the frame rate will be increased when playing in the video player, causing the video to run faster than normal. 7.1.7 Save an Image 1. 2. 3. 4.
You may skip step 3 by presetting the folder where you want to save the images and the format you want to save them in. 7.1.8 Print an Image Print the current image of the video you choose. 1. 2. 3. 4. Open Internet Explorer and log in to the unit. Click the Playback button on the top of the page. Click the Open Record button. The Record Display Window will show the information of the available 5. 6. 7. 8. video clips. Select the date you want to search the record from.
7.1.9 Backup the Recorded Video Different from Save Video, the Backup function will save all the recorded videos which belong to the time slot you set, instead of the clips. 1. Open Internet Explorer and log in to the unit. 2. Click the Open Record button to select data. 3. Click the Backup button. 4. 5. 6. 7. 8. Set the Start Time and End Time you want to backup. Select the cameras you want to backup. Select the directory you want to save the backup data. Click the Backup button.
132
7.2 Remote Playback System Application 7.2.1 Playback System Application Control Panel The Playback System control panel is similar to the playback panel in Internet Explorer. Check Playback Control Panel for more details about those buttons.
4. 5. 6. 7. 8. 9. 10. Insert the name of your unit. Insert the IP address of that unit. Modify the port if necessary. Insert the user name. Insert the password. Check the Save Password option. Click the Test Server button to test the connection between the local application and the remote unit. 11. Click the Add button to add this unit into the remote server list. 12. Click the OK button. 7.2.
1. Startup > NUUO NVRmini 2 > Playback System. 2. Click the Open Record button. 3. Click the icon on the top of the Date-Time Panel to obtain the Remote Playback Site Management dialog, and then select the server you want to access. 4. Highlight the records you want to view in the Time Table. 5. Set the Date Time Period. The search process in the Playback System application is similar to that of Internet Explorer. Check Search the Recorded Video for more details about the setting process. 7.2.
recoding period. Check Intelligent Search for more details. 8. The searched events will be listed. Click to find that event. There are 5 types of unusual events: General Motion, Foreign Object, Missing Object, Focus Lost, and Camera Occlusion. General Motion: Detect all movements in the defined area. Foreign Object: Alarm when any additional object appears in the defined area on the screen. Missing Object: Alarm when the selected object is removed from the defined area on the screen.
control to the right to sharpen the image, to the left to soften it. Brightness: Check the option to activate the function. Move the slider control to the right to make the image brighter. Contrast: Check the option to activate the function. Move the slider control to the right to increase contrast. Grey Scale: Check the option to show the record in gray-scale mode so the image displays in black and white. 9. Click the OK button. Stop: Stop the enhancement function and close the enhancement tool.
7.2.8 Save an Image 1. Startup > NUUO NVRmini 2 > Playback System. 2. Click the Open Record button. 3. The Record Display Window will show the information of the available video clips. Select the date from which you want to search the record. Check Search the Recorded Video for more details. 4. Highlight the video records that you want to review. 5. Choose the camera display from which you want to save pictures. 6. Click the Save Image button when the image you want is shown on the screen. 7. 8. 9. 10.
7.2.10 Backup the Recorded Video Different from Save Video, the Backup function will save all the recorded videos which belong to the time slot you set, instead of the clips. 1. 2. 3. 4. 5. 6. Startup > NUUO NVRmini 2 > Playback System. Click the Open Record button to select data. Click the Backup button. Set the Start Time and End Time you want to backup. Select the cameras you want to backup. Select the directory you want to save the backup data. 7. Click the Backup button.
8. Backup and Delete Records 8.1 The Backup System Application In addition to the ways mentioned in the previous chapters, you can apply the application to backup your files. 1. Startup > NUUO NVRmini 2 > Backup System. 2. Click the Remote Server Site button to set up remote server. 3. Insert the name of your unit. 4. Insert the IP address of that unit. 5. Modify the port if necessary.
6. Insert the user name. 7. Insert the password. 8. Check the Save Password option. 9. Click the Test Server button to test the connection between the local application and the remote unit. 10. Click the Add button to add this unit into the remote server list. 11. Click the OK button. 12. Click the ▼ button next to Remote Server Site button, and select one of servers you added. 13. Click the New Period button to select the record date. 14. Set the Start Time and End Time you want to backup.
18. Click the Backup button. 19. Select the way and directory you want to save the backup data. 20. Check the Include Playback application option, which will add Playback application into the backup folder. 21. Click the OK button. 8.2 Backup the Recorded Video through Windows Explorer 1. Find your unit through Windows Explorer (insert “\\” plus the IP address of your unit) 2. Open the “public” folder. 3. Insert the name and password of the administrator. 4.
5. Copy the date folder which you want to backup to your desktop / laptop. 8.3 Backup the Recorded Video through FTP 1. Find your unit through Windows Explorer (insert “ftp://” plus the IP address of your unit) 2. Insert the name and password of the administrator. 3. Select the volume and open the “VIDEODATA” folder. 4. Copy the date folder which you want to backup to your desktop / laptop. 8.4 Playback the Backup Records 8.4.1 With Playback Application 1.
2. Click the Remote Server Site 3. 4. 5. 6. 7. 8. button to set up remote server. Insert the name of your unit. Insert the IP address of that unit. Modify the port if necessary. Insert the user name. Insert the password. Check the Save Password option. 9. Click the Test Server button to test the connection between the local application and the remote unit. 10. Click the Add button to add this unit into the remote server list. 11. Click the OK button. 12.
13. Click the New Period button to select the record date. 14. Set the Start Time and End Time. (or highlight the video records which you want to delete) 15. Select the cameras you want to delete the records. 16. Click the OK button. 17. Select the time slot which you want to delete.
18. Click the Delete button. 19. Confirm the check dialog. 8.5.2 Without Backup Application 1. Find your unit through Windows Explorer (insert “\\” plus the IP address of your unit). 2. Open the “public” folder. 3. Insert the name and password of the administrator. 4. Select the volume and open the “VIDEODATA” folder. 5. Select the date folder which you want to delete. 6. Delete the folder. In order to keep the system stable, do not delete recorded data from the day in which you do the delete process.
9. Verification Tool The Verification Tool verifies whether the data created by the system has been tampered with. It’s the process by which a digital watermark (a digital signature) is added to each recorded video frame to ensure its authenticity. There are three types of data could be verified by Verification Tool: 1. File in (.dat) (.264) format will be displayed as . 2. File in (.avi) (.asf) format will be displayed as . 3. File in (.bmp) (.jpg) format will be displayed as . 9.
Video Preview: Preview designate file in verification list. Select the buttons below to play , pause , and stop the video file. 9.2 Verify Image / Video 1. Select single or multiple files for verification. 2. Click the Verify button to start verification. 3. The verification result will show on watermark column. If a file was tampered with, it will show ; if a file passed verification, it will show . Watermark Search Mode Screen Division ermark Verification report 4.
10. External Storage Total recording space of 4 bay unit can be expanded largely by connecting DAS through eSATA port. Follow the directions to enlarge your recording space. 10.1 Create a Volume on DAS The current compatible DAS is AXUS FiT Series. We don’t guarantee the quality of other DAS models. Please refer to the manual of AXUS FiT Series to create a single volume on DAS.
Refer to the section of Create a RAID Volume to create a volume for it. You can either create a volume with eSATA and embedded disk(s), or create an isolate volume with eSATA disk only.
11. Log out Click the Logout button on the top of the page to log out of the system. If there is no action in 10 minutes, the system will log out automatically to avoid unauthorized access.
12. Remote PC System Requirements Remote PC Minimum Requirements Model 2/4 bay OS Windows XP 32 bit, Windows 7 32/64 bit Supported CPU Intel Core 2 Duo, 2.6GHz RAM 1GB User 1. HTTP Web browser - Internet Explorer 8 and Interface later 2.
13. Troubleshooting 13.1 Replace a Failed Disk Drive If a disk drive fails, the Disk Status LED becomes orange. If the disk drive belongs to a RAID Volume, the Volume goes Critical or Offline, depending on RAID level. See Check RAID Volume Status for details. Replace the failed disk drive with a new disk drive of the same or slightly greater capacity. You do not have to power down the unit. Refer to Modify RAID Volume to remove the failed disk and replace it with a new one. 13.
3. Press and hold the reset button for 8 seconds, release your hands until the buzzer beeps one time and the System Status LED flashes in blue. 4. System will restart and the Administrator’s password is now reset to admin. 13.5 Restore All Default Configuration If you want to restore all configurations to default setting, follow the following steps. 1. Verify that the system is fully booted. 2. Insert your reset tool into the reset button hole on the back of the device. 3.
4. Click the upper bar to begin the installation process. 5. Click the Install button to complete the process. 13.7 Cannot Log in to the Unit with Internet Explorer 1. Check the settings of your antivirus software. 2. Change to appropriate settings or turn off this antivirus software. Please visit NUUO wiki for more information. http://support.nuuo.com/mediawiki/index.
Appendix – RAID System Introduction to RAID RAID (Redundant Array of Independent Disks) allows multiple disk drives to be combined together into a RAID Volume. You will create a RAID Volume on your unit when you perform the setup procedure.
If disk drives of different capacities are used, there will also be unused capacity on the larger drives. Because RAID 0 does not offer Fault Tolerance, meaning that you cannot recover your data after a disk drive failure, we do not recommend a RAID 0 Volume for your unit. RAID 0 Volumes on this unit consist of one or more disk drives. RAID 1 – Mirror When a RAID Volume is mirrored, identical data is written to a pair of disk drives, while reads are performed in parallel.
RAID 1 Volumes on this unit consist of two disk drives. If you want a mirrored RAID Volume with more than two disk drives, see RAID 10 – Mirror / Stripe for details. RAID 5 – Block Striping with Distributed Parity RAID 5 organizes block data and parity data across the disk drives. Generally, RAID level 5 tends to exhibit lower random write performance due to the heavy workload of parity recalculation for each I/O. RAID 5 works well for file, database, application and web servers.
The data capacity RAID 10 Volume equals the capacity of the smallest disk drive times the number of disk drives, divided by two. In some cases, RAID 10 offers double fault tolerance, depending on which disk drives fail. RAID 10 Volumes on this unit consist of four disk drives. Because all of the available disk drives are used for the RAID Volume, you cannot set up a spare drive with RAID 10. Choosing a RAID Level There are several issues to consider when choosing the RAID level.
improved by spreading the I/O load across many channels and being lost drives Should not be used in mission critical environments No parity calculation overhead is involved RAID 1 Advantage Simplest RAID storage subsystem design Can increase read performance by Disadvantage Very high disk overhead - uses only 50% of total capacity Disk failure has a medium impact on throughput processing data requests in parallel since the same data resides on two different drives RAID 5 Adv
Appendix – Camera Integration Camera Support List Any information about camera integration, including camera model and its spec, please refer to NUUO website: http://www.nuuo.com/product.
Add: C Block, 18 Sihyuan St. Jhongjheng District, Taiwan (ROC) TEL: +886-2-2362-2260 http://www.nuuo.com/ehelpdesk.
