User Manual

64
4. Check the Enable or Disable option.
5. Click the OK button.
2.7.4 UPS Setup
This feature enables you to tell your unit how long to run on APC
Uninterruptable Power Supply (UPS) battery power and when to shut down,
after power failure.
1. Attach the APC UPS to one of the unit’s USB ports.
2. Open Internet Explorer and log in to the unit.
3. Click System / Settings.
4. Click the APU UPS tab.
5. Check one of the options:
 Disable: Run until the UPS battery is depleted
 System shutdown as power of the UPS remains __ %: Run until the
UPS battery remains this percentage.
 System shutdown as power of the UPS remains __ min.: Run until
the UPS battery remains the certain period of time.
6. Fill in the specific value if you choose the last two options.
7. Click the OK button.