The Intelligent Surveillance Solution SCB-C24 User Manual Ver. 1.0.120723.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................................. 1 1. INTRODUCTION .................................................................................................................................. 2 1.1.Key Features ................................................................................................................
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 1.Introduction C24 is an I/O box to intermediate the communication between a surveillance server and multiple peripherals. It joins up all the major components in your surveillance network to deliver your prospective management and protection over your property. This manual combs the hardware/software setup for C24.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 1.1.Key Features - Supports wide range of DC-in voltages. Supports ASCII and Modbus/RTU protocols Supports baud rates from 1.2Kbps to 115.2 Kbps. Digital output signal with 3750Vrms isolation protection Supports dual watchdog: Hardware (module) watchdog & software (host) watchdog. External dip-switch to deliver configuration and hardware self-test. Status LED for each channels DIN-Rail and panel mount support.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 1.2. OS Requirement 32 bits MS Windows XP pro SP3 / Vista SP1 / Win 7 SP1 64 bits Win 7 SP1/ Win Server 2008 R2 1.3.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 1.4. Specification Communication & Data Transmission Protocol ASCII and Modbus RTU Interface RS-485 differential 2 half/duplex wires Speed 1.2Kbps to 115.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System Environment Characteristics Operating Temperature 0 to 65 degrees C Storage Temperature -20 to 65 degrees C Humidity 10~90%, non-condensing -6-
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 2. Overview To apply C24 to your surveillance system, get to know it first. Take a look around C24. The illustration below depicts C24 by top view and side view, with all major components and dimensions called out. Side View Top View Fig. 1.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 2.1. Pin Definition Name Description EXT PWR External power for isolation. Max. 30V DC. EXT. GND External ground for isolation. Max. 30V DC.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 3. Configure Protocol & Self-test C24 supports two protocols, Modbus RTU and ASCII, to communicate with the monitoring peripherals. Which protocol to use is adjustable by the 2-toggle dip-switch on one side of C24 as depicted in Overview. The external dip-switch also enters C24 into self-test whereby C24 examines itself to make sure its hardware is working properly Fig. 2.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 3.1.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 3.2. Back to Initial The dip-switch supports “Back to Initial”, a function that puts a set of communication settings back to “initial” state in case they cannot be remembered and thus disable C24 from being communicated with. The “initial” state represents: Setting Value ID 00 BD 9600 DF 00 Name: TRPC24 To bring C24 “Back to Initial”: Step 1: Close Mainconsole if it is opened. Step 2: Connect C24 to power if you haven’t.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 4. Network Deployment Diagram This diagram shows how server, converter (C08), I/O box (C24) are deployed within the surveillance network to work. C08 is subject to connection to maximum 256 I/O boxes (C24/C26/C28), with each I/O box identified by an address ranging from 0~255. Fig. 3.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 5. Hardware Setup This chapter combs through the necessary setup for the major components in the surveillance network including: 1. 2. 3. 4. peripherals, I/O box C24, converter C08, Windows-based server PC. 5.1. Connect C08 to Server PC An average Windows-based PC isn’t capable of RS485 communication. Therefore it needs C08, a USB-to-RS485 converter, to be able to talk to C24. Step 1: Connect C08 to PC an USB cable.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System 5.2. Connect C24 to C08 After C08 and server are connected and a COM port is up between them, proceed to connect C24 to C08. Connect C08 (TX+, DATA+) to C24 (DATA+). Connect C08 (TX-, DATA-) to C24 (DATA-). 5.3. Connect C24 to Power Supply Connect C24 to power supply by the power adopter that comes with your purchase. 5.4. Connect Peripherals to C24 & Power Supply Step 1: Split a power supply to negative pole and positive pole.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System Step 4: IOConfig opens. Step 5: On the left pane of IOConfig, click Scan button. Step 6: IOConfig proceeds to check the COM port, baud rate and address for the connected C24. Step 7: In a few seconds the checking is through. Scan result shows on the right pane. 5.6. Configure Mainconsole Step 1: Open Mainconsole on PC. Step 2: From Mainconsole tool bar, click button. Step 3: A menu opens. Step 4: Click Setting > System Setting.
The Intelligent Surveillance Solution NUUO NVR/DVR/Hybrid NDVR System Baud Rate & Address. Step 10: By ID, select the ID address for C24. Step 11: Run Digital Output Simulation. If the graphic in question lights on red, the setup is successfully made. Step 12: Click lower-right OK and quit setting.
