Programming Manual

18 Clinician Programming Manual
Pairing a Bridge Communicator to the Clinician Programmer
2. On the Clinician Programmer, select Add Bridge Comm from the Navigation menu.
e application begins scanning for a Bridge Communicator that is within 5 meters (16 feet) of the Clinician
Programmer Application.
e Clinician Programmer displays Bridge Communicators that are in range.
3. On the Clinician Programmer, tap the le or right triangles to scroll through the carousel of communicators if more
than one is in range.
4. Tap Select for the serial number that matches your Bridge Communicator.
5. If prompted, tap a button (not the red QSO button) and slide the On/O button down and hold for two seconds until
P displays.
6. Enter the four-digit code displayed on the Bridge Communicator into the popup window on the Clinician
Programmer. Enter the code displayed from le to right and top to bottom.
7. Tap Pair in the popup window.
0300-000176-001 Rev.2 SCS CP_Mobile.indb 18 7/12/19 9:20 AM