Programming Manual

30 Clinician Programming Manual

Using Programming Functions

Access dierent programing functions through the programming tabs.

• Subprogram: congure electrodes and adjust their amplitude, pulse width, and frequency. Refer to Conguring the

Subprogram on page 30.

• Shiing: shi amplitude allocation up and down a lead. Refer to Shiing the Amplitude on page 32.

• Impedance: conduct an impedance check. Refer to Performing Impedance Checks on page 33.

Conguring the Subprogram

Select electrodes for the subprogram and set stimulation parameters.

1. Tap an electrode on a lead (or optionally the can) in the Programming screen.

2. Tap

or to assign the polarity of the electrode (or can).

3. Add additional electrodes.

4. Optionally for each electrode, tap the le or right arrow to adjust the amplitude allocation percentage for that

electrode.

0300-000176-001 Rev.2 SCS CP_Mobile.indb 30 7/12/19 9:20 AM