Programming Manual
48 Clinician Programming Manual
Patient Devices
Patient Devices
For a patient to use their Programmer Charger or a Pocket Programmer, pair the Programmer Charger or Pocket
Programmer to the stimulator.
To pair programmers to the stimulator:
1. Tap
2. Tap the serial number space and enter the serial numbers located on the label on the back of the programmer. e
programmers need not be present when adding them to a stimulator.
3. Tap Conrm to send the programmer serial numbers to the stimulator.
4. Verify that the added patient devices are communicating with the stimulator by using each device to turn on
programs.
If the patient needs to pair with their stimulator from home, call Nuvectra Customer Service at 1-214-618-4980 or toll-
free at 1-844-727-7897 within the United States.
0300-000176-001 Rev.2 SCS CP_Mobile.indb 48 7/12/19 9:20 AM