Use and Care Manual

CHARGED

Solid red light indicates speaker is charged

CHARGING

2 fast flashes indicates speaker is charging

LOW POWER

3 fast flashes indicates low charge level

Charging and remaining charge level indicators

III. SYNCING SPEAKERS

NOTE: requires 2 or more Nuvelon FLARE speakers

[If you are not syncing any speakers go directly to Step IV. (A) on page 9]

If indicator lights are not solid after syncing, or you experience any difficulty

syncing your speakers, refer to the “Sync Tips and Help” Guide on the next page.

2. TURN ON REMAINING SPEAKERS1. TURN ON FIRST SPEAKER

3. PRESS & HOLD FIRST SPEAKER SYNC BUTTON 4. PRESS SYNC BUTTON ON ALL OTHER

SPEAKERS TO SYNC (one by one)

NOTE: When speakers are synced transmitter light and receiver light(s) will be solid

Transmitting speaker (first speaker turned on) Receiving speaker(s)

hold until both receiver and transmitter lights flash

hold until receiver light turns solid amber

VOLUME: Control master volume on device or first speaker, or individually on synced speakers