Operation Manual

16
EN
TECHNICAL OWNER MANUAL
B
D
E
6.6 Harmony
TM
Hub Interface
Compatibility & Orientation
1. Ensure you have the correct Harmony Hub
Interface for your NuVinci Optimized CVP.
• N330/N330f CVPs have a yellow dot (A),
and are compatible only with HHI3 Hub
Interfaces (B, for Harmony systems).
• N360 and N380/N380SE CVPs have
a black colored shift driver (C), and are
compatible only with HHI8 and H|Sync
Hub Interfaces (D, for Harmony 380
and
Harmony H|Sync systems).
2. Use the uninstalled Harmony Hub Interface
(E) to determine the desired orientation
• Orientation should be forward, parallel
to the chain stay with the Harmony main
connector facing forward.
• Move the Harmony Hub Interface along
the dropout to ensure clearance at different
axle positions.
3. With the Harmony Hub Interface oriented
correctly inside the right dropout, the
installation angle (F) is the indicated
angle of the dropout (20 degrees in this
example).
• Use the markings on the Harmony Hub
Interface to determine your approximate
installation angle.
C
A
6.6 Harmony Hub Interface Compatibility
& Orientation
N330/N330f and N360/N380/
N380
SE series CVPs have different
shift driver configurations, and are
compatible only with the appropriate Harmony
Hub Interface. Do not attempt to fit incorrect
Harmony Hub Interfaces, as damage will
occur.
0°
0°
F
20°
compatible
compatible
incompatible
D
incompatible

!
Harmony Hub Interface 3
Harmony Hub Interface 8
Harmony Hub Interface Sync
N330/N330f CVP
N360/N380/N380SE CVP
HARMONY ASSEMBLY OF COMPONENTS