Operation Manual

21
EN
TECHNICAL OWNER MANUAL
7.2 Removing Brake Configurations
Reference exploded view in section
8.3 for numbering and descriptions.
Remove the rear wheel per section 5.1.
Removing Roller Brake Hardware
1. Remove left hand axle nut (1), left hand
no-turn washer (2), and left hand nut (3).
2. Secure the wheel and use service tool
N360T-BKAD-01 to remove the brake
lock ring (6), and remove the roller brake
adapter (7) from the CVP.
Removing Rim Brake Hardware
1. Remove left hand axle nut (1), left hand
no-turn washer (2), left hand nut (3), and
cupped washer (4).
2. Using a thin flat device, pry and remove
the rim brake cover (5).
Removing Disc Brake Hardware
1. Remove left hand axle nut (1), left hand
no-turn washer (2), left hand nut (3), and
cupped washer (4).
2. Secure the wheel and use service tool
N360T-BKAD-01 to remove the brake lock
ring (6), and remove both the brake shield
(8) and disc brake adapter (9) from the
CVP.
HARMONY SERVICE INSTRUCTIONS

!