Operation Manual

22
EN
TECHNICAL OWNER MANUAL
7.3 Installing Brake Configurations
Reference exploded view in section
8.3 for numbering and descriptions.
Installing Roller Brake Hardware
1. Install the roller brake adapter (7) and
apply a high strength thread locking
compound (equivalent to Loctite® 277™)
around one complete thread of the brake
lock ring (6).
2. Using service tool N360T-BKAD-01, install
and torque the brake lock ring (6) to 55-65
Nm (41-48 ft-lbs).
3. After installing roller brake, install and
torque left hand nut (3) to 30-35 Nm (22-
26 ft-lbs).
Installing Rim Brake Hardware
1. Press rim brake cover (5) into position
until if seats fully, followed by the cupped
washer (4).
2. Install and torque left hand nut (3) to 30-35
Nm (22-26 ft-lbs).
HARMONY SERVICE INSTRUCTIONS
Installing Disc Brake Hardware
1. Install the disc brake adapter (9) and brake
shield (8) and apply a high strength thread
locking compound (equivalent to Loctite®
277™) around one complete thread of the
brake lock ring (6).
2. Using service tool N360T-BKAD-01, install
and torque the brake lock ring (6) to 55-65
Nm (41-48 ft-lbs).
3. Install and torque left hand nut (3) to 30-35
Nm (22-26 ft-lbs).

!