Operation Manual

23
EN
TECHNICAL OWNER MANUAL
8. Harmony technical data
HARMONY TECHNICAL DATA
8.1 CVP Specifications
*Harmony Hub Interfaces
MY12-15 are chain
compatible only
**This data refers to all
Harmony Hub Interfaces
MY12-15 which are chain
compatible only
Hub N330/N330f
Hub colors Silver or black
Speed ratio Infinitely variable within ratio range
Ratio range 330% nominal, 0.5 underdrive to 1.65 overdrive
Controller H3
Other compatible controller –
Shifting Variable twist grip, ¾ turn
Hub Interface HHI3
Other compatible HI‘s –
Spoke configurations 32 or 36 hole
Brake configurations Disc, rim, or roller
CVP weight 2450 grams
Drop-out width 135mm, horizontal or vertical
Axle length 183mm
Axle threads M10 x 1
Chainline 49.0 ± 0.5mm
Beltline (Gates) 45.5 ± 0.5 mm
Beltline (Conti-Tech) 46.2 ± 0.5 mm
Sprocket sizes 16-22 tooth (chain)
20-28 tooth (belt)
Sprocket type Standard 9-spline, flat on one side
Sprocket ratio definition Front sprocket teeth / Rear sprocket teeth
Sprocket ratio minimum (Pedal bikes) 1.8 (Table in section 8.2)
Sprocket ratio minimum (Front motor e-Bikes) 1.8 (Table in section 8.2)
Sprocket ratio minimum (Mid motor e-Bikes) 2.1 (Table in section 8.2)
Spoke flange diameter 125.0 mm
Center to left spoke flange 26.0 mm
Center to right spoke flange 26.0 mm
Harmony 330
Hub N380/N380SE
Hub colors Silver or black
Speed ratio Infinitely variable within ratio range
Ratio range 380% nominal, 0.5 underdrive to 1.9 overdrive
Controller H8
Other compatible controller H|Sync
Shifting Variable twist grip, ¾ turn
Hub Interface HHI8
Other compatible HI‘s H|SYNC, (Harmony Hub Interfaces MY12-15)*
Spoke configurations 32 or 36 hole
Brake configurations Disc, rim, or roller
CVP weight 2450 grams
Drop-out width 135mm, horizontal or vertical
Axle length 183mm
Axle threads M10 x 1
Chainline 49.0 ± 0.5mm
Beltline (Gates) 45.5 ± 0.5 mm
Beltline (Conti-Tech) 46.2 ± 0.5 mm
Sprocket sizes 16-20 tooth (chain)
16-22 tooth (chain)**
20-28 tooth (belt)
Sprocket type Standard 9-spline, flat on one side
Sprocket ratio definition Front sprocket teeth / Rear sprocket teeth
Sprocket ratio minimum (Pedal bikes) 1.8 (Table in section 8.2)
Sprocket ratio minimum (Front motor e-Bikes) 1.8 (Table in section 8.2)
Sprocket ratio minimum (Mid motor e-Bikes) 2.1 (Table in section 8.2)
Spoke flange diameter 125.0 mm
Center to left spoke flange 26.0 mm
Center to right spoke flange 26.0 mm
Harmony 380/380SE