Installation Instraction

Installation Instructions
ITEM NO. :
62/1042 62/1043 62/1044
1. Shut off main power at circuit breaker before attempting to install
luminaire.
2. Install mounting plate to junction box in ceiling using mounting
screws.
4. Secure the two screws to the mounting plate. You should leave the
proper length of the two screws beyond the surface of the mounting
plate to ensure enough thread is available to properly mount the
canopy with the mounting screws.
5. Pull the existing electrical wires out of the junction box and make
proper connections using wire nuts.
6. Position metal pan over mounting plate and align holes in metal pan with
screws. With thread protruding through metal pan surface,
thread and secure both cap nuts.
7. Twist counterclockwise to fasten the cloudy glass.
8. Turn on power.
INSTALLATION
Use UL listed wire connectors for connections.
WARNING
Turn off the main power at the circuit breaker
before installation,replacing lamp or maintenance.
Installation must be performed by a qualified
electrician.
To ensure the success of the installation,be sure
to read these instructions and review the diagrams
thoroughly before beginning.
screws
mounting plate
j-box
wire nuts
metal pan
cap nuts
the cloudy glass