Installation Instruction

ManualsBrandsNuvo ManualsCeiling LightsBlink Plus Collection 62/1052 Surface Flushmount Ceiling Light with LED Bulb, 277 Voltage and 22 Watts in White

Table Of Contents

Satco Products Inc.

110 Heartland Blvd.,

Brentwood, NY 11717

PH 631-243-2022

FX 631-243-2027

Distribution Centers:

New York, Florida,

Texas, Washington,

California, Puerto Rico

National Toll-Free:

800-43-SATCO

(800-437-2826)

www.nuvolighting.com

Satco Products, Inc.

Operation manual

LED Flush mount light

Blink Plus Series

Thank you for purchasing our product. This fixture has

been manufactured from components with advanced

optoelectronics to ensure high reliability and long life.

Before assembling please read this Operation Manual

carefully and save in a safe place for future reference.

Please note that all electrical connections must be in

accordance with local and National Electrical Code

standards as well as local building codes. In case you are

not familiar with proper wiring connections and building

codes, consult a qualified electrician.

Safety recommendations

RISK OF ELECTRIC SHOCK – THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE

WITH APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH MENTIONED

ABOVE CODES AND HAZARDS INVOLVED. DISCONNECT POWER AT CIRCUIT BREAKER

OR FUSE BEFORE INSTALLING OR SERVICING.

2. Before use of the product carefully read the whole Operation Manual.

3. THE PRODUCT IS PURPOSED FOR INTERIOR USE ONLY, SUITABLE FOR

DAMP LOCATIONS.

4. Protect the product against direct contact with water.

5. Assemble the product only with the use of parts provided and the housing;

improper assembly may result in device failing which could damage the product,

personal property or cause injury.

6. Assembly shall follow with accessories delivered with the set only.

7. The device is not a toy, KEEP OUT OF REACH OF CHILDREN.

With Integrated Dimmable Driver

Specifcations:

Power consumption: 18W/20W/22W/30W/40W/45W

Color Temp.: 2700K/3000K/4000K/5000K

Life span: 50,000h

Illumination authorization<5%

per 10,000h

Blink Plus

Operating Voltage:120/277VAC

Dimming: Triac (Dimming only @120V)

Summary of content (2 pages)

PAGE 1
Operation manual LED Flush mount light Blink Plus Series With Integrated Dimmable Driver Thank you for purchasing our product. This fixture has been manufactured from components with advanced optoelectronics to ensure high reliability and long life. Before assembling please read this Operation Manual carefully and save in a safe place for future reference. Please note that all electrical connections must be in accordance with local and National Electrical Code standards as well as local building codes.
PAGE 2
Mounting Bracket Installation Step 1 Step 2 Step 3 Turn-off /disconnect power at circuit breaker. Attach connector (provided) to AC cable from junction box: L side to Black AC wire N side to White AC wire Position bracket in place: Mark mounting hole positions on ceiling with reference on bracket. Drill holes, mount appropriate anchors, then secure screws into anchors. Attach the bracket to junction box using the 2 screws (provided). Pull the AC cable with connector through the bracket center hole.