Installation Guide

line from the shutoff valve and attach
to the brass insert in the “Out” port.
Use the towel to wipe up any residual
water that spills from the hose. Tighten
gently with the wrench as needed.
8. Connect the water shutoff valve to the
“In” port of the Dishwasher System
using the braided stainless steel
dishwasher connector. Tighten gently
with the wrench as needed.
9. Connect the cartridge to the head by
inserting and twisting the cartridge
until it clicks into place. Slowly turn
the water shutoff valve open to resume
the water flow and check for leaks.
a. If a leak exists, turn off the
water and tighten the water lines.
You may need to check if the
PTFE tape has created a proper
seal and repeat this step.
If no leak exists, completely open the
valve and let your system sit for one hour
before using your dishwasher.
877-688-64264
Dishwasher System